LIUGONG 14C0197 CLG970 CLG975 Tilmaamaha Raad-raaca Giraangiraha / Raad-raaca Hore ee Idler-ka / EXC Qayb-qayb ah Soo-saare / cqctrack
LIUGONG14C0197Tilmaamaha Jidka CLG970/CLG975 Isku-xidhka Shaandhada/Jidka Hore ee Shaandhada
Qaybta Tayada Hoose ee OEM-ga ee Codsiyada Qodista Shaqada Culus
Soo-saaraha Isha Xirfadeed: CQC TRACK (HELI)
1. Dulmar Farsamo: Injineernimo Heer Sare ah oo loogu talagalay Qodayaasha Heerka 70-Tan ah
LIUGONG CLG970 iyo CLG975 waxay matalaan heerka ugu sarreeya ee injineernimada qodayaasha culus ee Shiinaha, oo ka shaqeeya fasalka 65-75 metric tan ee deegaanka macdanta iyo dhismaha ugu baahida badan adduunka. Mashiinnadani waxaa si ballaaran loogu adeegsadaa hawlaha macdanta dusha sare, mashaariicda kaabayaasha dhaqaalaha ee waaweyn, wax soo saarka dhagaxa, iyo codsiyada dhulka ee culus ee Koonfurta Ameerika, Afrika, Ruushka, Australia, Kuuriya, iyo suuqyada kale ee adduunka.
Golaha Jidka Hore ee Raad-raaca (Guide Wheel), oo ay aqoonsatay lambarka qaybta LIUGONG OEM 14C0197, waa qayb muhiim u ah hawlgalka gaariga hoostiisa kaas oo u adeega hagitaanka hore iyo nidaamka maaraynta xiisadda ee silsiladda raad-raaca qodaha. Iyada oo ah lammaane u ah isha dambe ee wadista, qalabka dayac-tirka waa inuu u adkeystaa culaysyo xad dhaaf ah, xoqid joogto ah, iyo xoogagga saameynta daran iyadoo la ilaalinayo isku-xidhka saxda ah ee wadada.
Dukumeentigani wuxuu bixiyaa tilmaamo farsamo oo dhammaystiran oo loogu talagalay LIUGONG 14C0197 Track Front Idler Assembly, oo la jaan qaadaya moodooyinka qodayaasha CLG970 iyo CLG975. Iyada oo ah soo-saare xirfadle ah oo ilo-wareed ah, CQC TRACK (HELI) waxay bixisaa qaybaha gaariga hoostiisa ee tayada OEM ee loo sameeyay inay buuxiyaan ama ka sarreeyaan qeexitaannada qalabka asalka ah ee loogu talagalay macdan qodista culus iyo codsiyada dhismaha.
2. Qeexitaanka Shaqada: Doorka Muhiimka ah ee Qofka Hore u Jeeda
2.1 Hawlaha Aasaasiga ah
Golaha Idler-ka ee Track Front wuxuu u adeegaa afar hawlood oo isku xiran oo muhiim u ah waxqabadka qodayaasha iyo cimriga dheer ee xamuulka hoostooda:
| Shaqada | Sharaxaad | Saamaynta Hawlgalka |
|---|---|---|
| Hagidda Raad-raaca iyo Xakamaynta Jihada | Waxay u adeegtaa hagaha ugu horreeya ee silsiladda tareenka, iyadoo hubinaysa isku-dubbarid habboon iyo jihada safarka toosan marka tareenku galo oo ka baxo qaab-dhismeedka ugu weyn ee gaadhiga hoostiisa | Waxay ka hortagtaa ka-noqoshada raad-raaca; waxay hubisaa xasilloonida xariiqda toosan inta lagu jiro safarka |
| Maareynta Xiisadda Raadinta | Ku rakiban gaari la dhaqaajin karo oo ku xiran dhululubada xiisadda wadada, taasoo u oggolaanaysa hagaajinta saxda ah ee gariirka wadada | Waxay wanaajisaa xiriirka wadada-ilaa-dhulka; waxay ka hortagtaa xirashada xad-dhaafka ah; waxay awood u siisaa ka saarista wadada |
| Qaybinta Culayska iyo Nuugista Saamaynta | Waxay taageertaa qayb ka mid ah miisaanka mashiinka (qiyaastii 8-12 tan qofkiiba) waxayna nuugtaa culayska saameynta bilowga ah ee caqabadaha iyo dhul aan sinnayn | Waxay ka ilaalisaa wadista ugu dambeysa iyo qaab-dhismeedka raadraaca waxyeelada shoogga uu keeno |
| Xiriirka Raad-raaca | Waxay bixisaa dusha qaloocan oo isku xidhka wadada ay ku wareegaan, taasoo hubinaysa isku xidhnaan siman iyo yaraynta iska caabinta isku dhaca | Waxay yareysaa luminta korontada; waxay kordhisaa cimriga silsiladda raadadka |
2.2 Aqoonsiga Qaybaha
| Magacaabista | Faahfaahin |
|---|---|
| Lambarka Qaybta OEM | 14C0197 |
| Nooca Qaybta | Raad-raaca Hore ee Idler / Hagaha Isku-xidhka Giraangiraha |
| Moodooyinka La Iswaafajin Karo | LIUGONG CLG970, CLG970E, CLG975, CLG975E |
| Fasalka Mashiinka | Qod-qode culus oo 65–75 tan ah |
| Booska Mashiin kasta | 2 (hal dhinac halkii wado) |
| Tixraacyo Kale | 14C0194 (kooxda roogga hoose ee la xiriirta) |
3. Faahfaahsan Kala-soocidda Qaybaha & Tilmaamaha Farsamada
3.1 Injineernimada Giraangiraha Idler (Rim)
Taayirada aan shaqaynayn waa qaybta wareegaysa ee muuqata ee si toos ah ula xidhiidha silsiladda tareenka. Injineernimadeedu waxay go'aamisaa cimriga xirashada iyo isku halaynta hawlgalka.
| Qaybta Tilmaamaha | Faahfaahin |
|---|---|
| Alaab | Bir kaarboon sare leh, bir daawaha xoog badan leh (SAE 1045/1050) ama bir la shubay (ZG35SiMn) |
| Habka Wax Soo Saarka | Samaynta qalabka CNC-ga ee xiran ama si sax ah loo shubay |
| Dhexroorka Dibadda | 650–750 mm (caadi ahaan fasalka 70-tan) |
| Naqshadeynta Flange-ka | Flanges laba-geesood ah oo ku yaal geesaha dibadda si loo hayo silsiladda raadadka |
| Dhererka Flange-ka | 25–32 mm (waxay ka hortagtaa in la joojiyo socodka inta lagu jiro hawlgalka jiirada dhinaca) |
| Adkaanta Dusha Sare ee Socodka | Kobcinta oo adkaata; HRC 52–58 |
| Qoto dheer oo Kiis ah | 6–10 mm (qoto dheer oo la xakameeyey oo loogu talagalay cimriga xirashada oo dheer) |
| Godka Dhexe | Si sax ah loo farsameeyay si loogu habeeyo baloogyada hagaha silsiladda raadraaca si loo helo xasillooni dheeraad ah oo dhinaca ah |
3.2 Tilmaamaha Shafka Idler (Spindle)
Usha qalooca ah waxay u adeegtaa sidii dariiqa dhexe ee qaada culayska, iyadoo dhammaan culaysyada hawlgalka ka gudbinaysa giraangiraha qalooca ilaa qaansooyinka taageerada iyo qaab-dhismeedka weyn.
| Qaybta Tilmaamaha | Faahfaahin |
|---|---|
| Alaab | Bir daawaha ah oo xoog badan leh (42CrMo ama wax u dhigma) |
| Daaweynta Kulaylka | La damiyay oo la hagaajiyay (Q&T) si loo helo adkeysi asaasi ah |
| Dhammaadka Dusha Sare | Si sax ah loo shiday ilaa ≤0.8 µm Ra si shaabaddu ugu habboonaato |
| Iska caabinta Daalka | Loo farsameeyay 10⁷+ wareegyo iyadoo aan la qiimeyn culayska |
| Xoog Laabista | Loogu talagalay inay u adkeysato waxyeellooyinka daran iyada oo aan lahayn isbeddel joogto ah |
3.3 Qaabeynta Nidaamka Rasaasta
Nidaamka raritaanka waa wadnaha isku-darka dadka aan shaqayn, isagoo go'aaminaya simanka wareegga iyo cimriga adeegga.
| Qaybta Tilmaamaha | Faahfaahin |
|---|---|
| Nooca sitaha | Biirta kubbadda is-waafajinta ee laba saf ah ama biirta duubista ee isku-dhafan |
| Awoodda Xamuulka | Loogu talagalay culaysyada isku-dhafan ee radial (miisaanka mashiinka) iyo culaysyada dhidibka (xoogagga dhinaca inta lagu jiro leexashada) |
| Qaab-dhismeedka aan habboonayn | Sifada is-waafajinta ayaa magdhab u ah khaladaadka yar yar ee usha-ilaa-qalooca |
| Saliidayn | Waxaa hore looga buuxiyay dufan EP ah oo lithium-comfy ah oo tayo sare leh |
| Nolosha Qaadashada | Loogu talagalay 5,000–8,000 oo saacadood oo shaqo ah xaaladaha caadiga ah |
3.4 Injineernimada Nidaamka Shaabadaynta
Nidaamka shaabadeynta ayaa muhiim u ah cimriga adeegga ee goobaha macdanta iyo dhismaha halkaas oo boodhka, dhoobada, iyo walxaha xoqidda ay ku badan yihiin.
| Qaybta Tilmaamaha | Faahfaahin |
|---|---|
| Nooca Shaabadda | Nidaamka caqabado badan leh: shaabad wejiga oo sabeynaysa (Duo-Cone) + shaabad bushimo radial ah |
| Qalabka Shaabadda Aasaasiga ah | Viton (FKM) oo loogu talagalay codsiyada heerkulka sare; NBR oo loogu talagalay codsiyada heerka caadiga ah |
| Ka Saarista Wasakhowga | Shaabadaha hore ee labyrinth waxay ka hortagaan soo gelitaanka ciidda, dhoobada, iyo walxaha yaryar |
| Haysashada Saliidda | Naqshad aan daadanayn ayaa ilaalisa saliidaynta dhalada muddo dheer |
| Nolosha Adeegga | Cimri cimri dheer ayaa lagu xidhay xaaladaha shaqada ee caadiga ah |
3.5 Is-dhexgalka Taabashada Jidka
Isku-dubaridka aan shaqaynayn wuxuu ka kooban yahay is-dhexgal sax ah oo loogu talagalay isku xirka nidaamka xiisadda wadada.
| Qaybta Tilmaamaha | Faahfaahin |
|---|---|
| Nooca Isdhexgalka | Madaxa dunta leh ama weelka la been abuuray |
| Isku xirka | Isku xidhka tooska ah si loo raad raaco dhululubada xiisadda iyo usha xiisadda |
| Kala duwanaanshaha Hagaajinta | Safarka 150–250 mm (wuxuu u oggolaanayaa fidinta silsiladda raadadka inta lagu jiro cimriga adeegga) |
| Habka Xiisadda | Dhululubo saliid leh (oo lagu hagaajin karo goobta iyada oo loo marayo qoryaha dufanka caadiga ah) |
4. Soo-saaraha Isha: CQC TRACK (HELI) – Soo-saaraha Qaybaha Gaariga Hoostiisa ee Xirfadlaha ah
4.1 Astaanta Soo-saaraha
CQC TRACK (oo ku shaqeysa xiriirka HELI Group) waa soo saare gaar ah iyo alaab-qeybiye qaybaha chassis-ka ee la raadraacay ee culus, oo xaruntiisu tahay Quanzhou, Shiinaha. Shirkaddu waxay ilaalisaa is-dhexgal toosan oo buuxa oo ku saabsan habka wax soo saarka, laga bilaabo xulashada alaabta ceeriin ilaa isku-darka ugu dambeeya iyo tijaabinta tayada.
Awoodaha Wax Soo Saarka ee Muhiimka ah:
| Awoodda | Sharaxaad |
|---|---|
| Foorno Xiran oo Dhiman | 4,000–8,000 tan oo ah makiinado wax lagu sameeyo si loo helo qulqulka hadhuudhka ugu wanaagsan iyo cufnaanta walxaha. |
| Daaweynta Kulaylka | Foornooyinka lagu adkeeyo kombiyuutarrada iyo kuwa lagu shido ee kaarboonaynta leh oo leh qaab-dhismeed heerkul sax ah |
| Makiinadaha Sax ah | Xarumaha wareejinta CNC ee awoodda weyn leh iyo xarumaha mashiinka lagu sameeyo oo leh saxnaan heer micron ah |
| Isku-dubaridka Shaabadeynta | Deegaan nadiif ah oo loogu talagalay shaabadeynta wejiga iyo nidaamyada siddaha |
| Tijaabada Tayada | Shaybaarka NDT ee gudaha ku jira oo leh awoodo tijaabinta MPI, UT, iyo adkeysiga |
4.2 Habraacyada Hubinta Tayada ee Qaybaha Heerka Macdanta
| Cabbirka Xakamaynta Tayada | Heerka Hirgelinta | Habka Xaqiijinta |
|---|---|---|
| Shahaadada Agabka | Raad-raac buuxa oo leh falanqaynta halabuurka kiimikada | Warbixinnada Tijaabada Warshadda (MTRs); falanqaynta muuqaalka |
| Tijaabada Aan Burburka Lahayn | Kormeerka Qaybaha Birlabta ah (MPI) ee qaybaha la been abuuray | Ogaanshaha dildilaaca meelaha muhiimka ah ee walbahaarka |
| Xaqiijinta Cabbirka | Kormeerka Mashiinka Cabbirka Isku-dubaridka (CMM) | ± 0.02 mm dulqaadka joornaalada nuugista iyo guryaha shaabadda |
| Tijaabada Adkaanta | Xaqiijinta Rockwell (HRC) dhammaan dusha sare ee kulaylka lagu daweeyay | Cabbirka qoto dheer ee dusha sare iyo kiiska |
| Tijaabinta Shaabadda ee Daacadnimada | Xaqiijinta cadaadiska ee isku-dhafka shaabadda sabeynaya | Tijaabinta daadinta ka hor inta aan la rarin |
| U hoggaansanaanta Heerarka | ISO 9001: Habab wax soo saar oo shahaado haysta oo 2015 ah | Xaqiijinta hanti-dhawrka dhinac saddexaad |
4.3 Aasaaska Birta ee Codsiyada Shaqada Culus
CQC TRACK waxay shaqaaleysiisaa injineernimo bir-dhalineed oo horumarsan si loo gaaro dheelitirka ugu wanaagsan ee adkaanta, adkeysiga, iyo iska caabbinta daalka ee loo baahan yahay dadka shaqo la'aanta ah ee heerka 70-tan ah:
| Fasalka Daawaha | Codsiga | Sifooyinka Muhiimka ah |
|---|---|---|
| Birta Manganese ee 50Mn | Dadka caadiga ah ee shaqada culus qabta | Adkayn heer sare ah; iska caabin wanaagsan oo xirasho; kharash-ool ah |
| Daawaha Chromium ee 40Cr | Codsiyada daalka ee la xoojiyay | Adkaynta oo la hagaajiyay; xoog daal oo la xoojiyay; adkeysi wanaagsan |
| 42CrMo Chromium-Molybdenum | Codsiyada macdan qodista ee aadka u shaqada badan | Adkayn heer sare ah; iska caabin daal oo heer sare ah; adkeysi heerkul hoose oo la xoojiyay |
Injineernimada Daaweynta Kulaylka Labada-Hanti:
- Demin iyo Heerkulbeeg (Q&T): Jirka oo dhan oo la farsameeyay oo la xoojiyay 840–880°C, la damiyay, ka dibna lagu kululeeyay 500–650°C. Adkaanta asaasiga ah: 280–350 HB (29–38 HRC) — taasoo bixinaysa adkeysi ugu wanaagsan si loo nuugo saameynta.
- Adkaynta Dusha Sare ee Induction: Ka dib marka la dhammeeyo shaqada, dusha sare ee muhiimka ah ee la xidho waxay martaa adkaansho induction ah oo ku meel gaar ah. Adkaynta dusha sare: HRC 52–58 oo leh qoto dheer oo kiiska ah 5–12 mm — taasoo bixinaysa iska caabin heer sare ah oo xirasho ah iyadoo la ilaalinayo adkeysiga xudunta.
- Xaqiijinta Astaanta Adkaanta: Isku-xidhka Microhardness wuxuu hubiyaa kala-guurka la xakameeyey laga bilaabo dusha sare ee adag ilaa xudunta adag, isagoo ka hortagaya kala-soocidda ama kala-soocidda xudunta kiiska marka la saarayo saameynta.
5. Qaybaha gaariga hoostiisa mara ee la xiriira CLG970/CLG975
Dayactirka dhameystiran ee gaadiidka hoostiisa mara—oo muhiim u ah howlaha macdanta halkaasoo waqtiga shaqadu si toos ah u saameeyo dakhliga wax soo saarka—ciddiyaha hore waa in la qiimeeyaa iyadoo lala kaashanayo qaybaha dheeraadka ah. CQC TRACK waxay soo saartaa faylalka qaybaha chassis-ka oo dhammaystiran ee qodayaasha taxanaha LIUGONG CLG.
| Qaybta | Lambarka Qaybta OEM | Shaqada | Qoraalka Isdhexgalka |
|---|---|---|---|
| Raad-raaca Badhtamaha | 14C0194 /14C0287 | Miisaanka mashiinka taageerada ee xarigga hoose ee wadada; caadi ahaan 7-9 dhinac kasta | Waa in lagu beddelaa qalab si loo qaybiyo xirashada siman |
| Roogyada Xamuulka Qaada (Sare) | 14C0286 | Taageer xarigga soo celinta wadada sare; 2 dhinac kasta | Silsiladda hagaha tareenka ee ka sarreysa qaab-dhismeedka tareenka |
| Qalabka Darawalka | 46A0185 | Ka qaybgalka wadista kama dambaysta ah; wuxuu la mid yahay garoonka silsiladda orodka | Ku beddel silsiladda raadraaca sida nidaamka la isku daray |
| Isku-xidhka Silsiladda Raad-raaca | LIUGON-spec | Silsilad xarig leh oo saliidaysan (SLT) oo leh buushado adag | 260 mm oo ah nooca caadiga ah ee 70-ton ee fasalka |
| Kabaha Raad-raaca | Ballaca 600–800 mm | Saddex geesoodka (dhagaxa) macdanta; double grouser codsiyada guud | Ku habboon dhulka codsiga |
| Habeeyaha Raad-raaca & Guga Dib-u-soo-noqoshada | La xidhiidha caajiska | Cadaadiska Haydarooliga iyo nuugista saameynta | Si toos ah ula xiriir 14C0197 idler |
5.1 Mabda'a Iswaafajinta Silsiladda Idler iyo Track
Qodayaasha macdan qodista CLG970/CLG975, qalabka hore ee aan shaqayn iyo silsiladda raadadka waa in loo qiimeeyaa inay yihiin nidaam isku mid ah. Ku shaqaynta qalab cusub oo leh silsilad aad u duugowday (ama caksigeeda) waxay abuurtaa:
- Xidhashada Raad-raaca Degdegga ah: Qaab-dhismeedka xiriirka ee aan iswaafaqsanayn wuxuu burburiyaa dusha sare ee orodka
- Waxyeellada Buufinta: Cilad degdeg ah oo ku timaadda bushqadaha silsiladda tareenka
- Khatarta Ka-hortagga Raad-raaca: Ka-qaybgalka aan habboonayn wuxuu kordhiyaa suurtagalnimada simbiriirixan dhinaca ah
- Nolosha Adeegga oo La Yareeyay: 40-60% hoos u dhac ku yimid cimriga guud ee gaariga hoostiisa mara
6. Codsiyada Suuqa Caalamiga ah iyo La-qabsiga Gobolka
Taxanaha LIUGONG CLG970/CLG975 waxaa lagu farsameeyaa howlaha macdan qodista iyo dhismaha culus ee adduunka oo dhan. Qaybaha CQC TRACK waxaa lagu farsameeyay la-qabsiyo goboleed oo gaar ah si loo daboolo xaaladaha hawlgalka maxalliga ah iyo doorbidyada iibka.
6.1 Koonfurta Ameerika
| Halbeegga | La qabsiga |
|---|---|
| Deegaanka Hawlgalka | Macdanta Andean ee meelaha sare ku taal (3,000–4,500m), xoqidda macdanta birta, hawlgallada naxaasta, iyo gobollada xeebaha ee qoyaanka badan leh |
| La qabsiga Qaybta | Dahaarka ka hortagga daxalka oo la xoojiyay; nidaamyada shaabadaynta ee culus si looga saaro walxaha yaryar; xaqiijinta waxqabadka sare |
| Doorbidka Iibsiga | Soo saaraha tooska ah ee warshadda; xirmooyinka gaariga hoostiisa oo dhammaystiran; barnaamijyada dammaanadda ee la dheereeyey |
6.2 Afrika
| Halbeegga | La qabsiga |
|---|---|
| Deegaanka Hawlgalka | Ciid/granite aad u xun, heerkul sare oo jawi ah, goobo macdan qodis fog, masaafooyin dheer oo gaadiid ah |
| La qabsiga Qaybta | Qaababka saliidda heerkulka sare leh; Shaabadaha Viton si ay u caabiyaan kiimikada; muddooyin adeeg oo la dheereeyay; dhisme adag oo loogu talagalay hawlgalka fog |
| Doorbidka Iibsiga | Dalabaadka badan ee hawlaha macdan qodista; maraakiibta konteenarada ku jirta; dukumeentiyo farsamo oo Ingiriis iyo Faransiis ah |
6.3 Ruushka iyo CIS
| Halbeegga | La qabsiga |
|---|---|
| Deegaanka Hawlgalka | Heerkulka ka hooseeya eber (-40°C), baraf-badeedka dhulka, macdan qodista dhulka barafaysan, xaaladaha dhalaalka xilliyeedka |
| La qabsiga Qaybta | Saliid heerkul hoose leh; qaacidooyinka birta oo leh adkeysi saameyn heerkul hoose oo la xoojiyay; shaabado la hagaajiyay oo bilowga qabowga ah; naqshad jabka ka hortagga jilicsanaanta |
| Doorbidka Iibsiga | Qiimaha tooska ah ee warshadda; xirmooyinka shahaadada oo dhammaystiran; taageerada dukumentiyada kastamka |
6.4 Ustaraaliya
| Halbeegga | La qabsiga |
|---|---|
| Deegaanka Hawlgalka | Macdanta birta (Pilbara), xoqid sare, kulayl aad u daran, hawlgallo fog fog, iyo heerar badbaado oo adag |
| La qabsiga Qaybta | Nidaamyada shaabadaysan ee culus ee ka saarista walxaha yaryar; naqshadaynta cimriga xirashada ee dheer; u hoggaansanaanta heerarka badbaadada macdanta ee Australia |
| Doorbidka Iibsiga | Bixinta waqtiga ku habboon; helitaanka qalabka gaariga hoostiisa mara oo dhammaystiran; taageero farsamo oo leh matalaad maxalli ah |
6.5 Kuuriya
| Halbeegga | La qabsiga |
|---|---|
| Deegaanka Hawlgalka | Dhismaha magaalooyinka, hawlaha qodista dhagaxa, codsiyada dekadaha maraakiibta, shuruudaha saxnaanta sare leh |
| La qabsiga Qaybta | Dulqaadka cabbirka saxda ah; astaan hoos u dhac buuqa; Shahaadada CE/KCS; dhammaystirka dusha sare oo tayo sare leh |
| Doorbidka Iibsiga | Tirada dalabaadka yar-ilaa-dhexe; rar degdeg ah; dukumeentiyo farsamo oo ku qoran Kuuriya |
6.6 Dhaqamada ugu Fiican ee Warshadaha Macdanta
Hawlaha macdan qodista ee dhammaan gobollada, hababka soo iibsiga ee soo socda ayaa lagu talinayaa:
| Tababar | Faa'iido |
|---|---|
| Soo-saaris Toos ah oo Warshadeed | Qiimaha ugu hooseeya ee cutubka; taageero farsamo oo toos ah; qiimaha mugga |
| Qalabka Dhammaystiran ee Gaariga Hoostiisa | Qaybaha xirashada ee isku midka ah (rollers, stalers, sprockets, silsilado); cimri dheer oo adeeg ah |
| Jadwalka Dayactirka La Qorsheeyay | Beddelka isku-dubaridka ah inta lagu jiro wakhtiga shaqada ee la qorsheeyay; wuxuu yareeyaa joojinta wax soo saarka |
| Raad-raaca Qaybaha | Warbixinnada Tijaabada Warshadda; diiwaannada daaweynta kulaylka; shahaadada tayada |
7. Xaqiijinta Iibsiga iyo Iswaafajinta
7.1 Tallaabooyinka Xaqiijinta Iibsashada Kahor
- Xaqiijinta Moodeelka Mashiinka: Xaqiiji magaca saxda ah ee moodeelka (CLG970, CLG970E, CLG975, CLG975E) iyo lambarka taxanaha ah
- Xaqiijinta Lambarka Qaybta OEM: Xaqiiji lambarka qaybta aan shaqaynayn 14C0197 iyadoo la raacayo dukumeentiyada mashiinka
- Qaabeynta Gaariga Hoostiisa: Hubi tirada roogagga hoose ee dhinac kasta (badanaa 7-9); xaqiiji ballaca kabaha tareenka
- Xaqiijinta Garaaca Silsiladda Raad-raaca: Xaqiiji garaaca silsiladda raad-raaca ee jira (heerka 260 mm ee fasalka 70-tan)
- Iswaafajinta Nidaamka Xiisadda: Hubi iswaafajinta dhululubada hagaajiyaha raadadka ee leh is-dhexgalka idler
7.2 Kanaallada Soo-dejinta
| Kanaal | Ugu Fiican | Faa'iidooyinka |
|---|---|---|
| Tooska Warshadda (CQC TRACK) | Shirkadaha macdan qodista, milkiilayaasha maraakiibta waaweyn, qaybiyeyaasha caalamiga ah | Qiimaha ugu hooseeya ee cutubka; taageero farsamo oo toos ah; qiimaha mugga; wax soo saar gaar ah |
| Shabakadda Qaybinta ee La Oggolaaday | Iibsi hal-cutub ah; beddelka degdegga ah ee goobta | Kaydka deegaanka; si degdeg ah loo diro; taageero farsamo oo luqadda maxalliga ah |
8. Talooyinka Dayactirka & Ka Hortagga Fashilka
8.1 Habraaca Kormeerka Caadiga ah ee Hawlgallada Macdanta
| Barta Kormeerka | Soo noqnoqoshada | Tilmaamayaasha | Ficil |
|---|---|---|---|
| Xidhmada Tuurista Idler | Todobaadle | Yaraynta dhexroorka > 15 mm; qaab xidhasho aan sinnayn | Cabbir xirashada; jadwalka beddelka |
| Xaaladda Flange-ka | Todobaadle | Xirashada laambadda > 5 mm; qaab-dhismeedka; dildilaac | Hubi khatarta ka-hortagga raad-raaca |
| Daacadnimada Shaabadda | Maalin kasta | Daadinta dufanka; wasakhowga muuqda | Beddelka shaabadda degdega ah haddii wax qaldamaan |
| Xaaladda Dhalista | Bille ah | Wareeg adag; buuq; ciyaar xad dhaaf ah | Beddelka beddelka |
| Xiisadda Jidka | Maalin kasta | Sagxad > 50 mm bartamaha; cidhiidhi xad dhaaf ah | Ku hagaaji qeexitaanka 25–50 mm ee sagxada |
| Boolal ku rakiban | Todobaadle | Xaqiijinta wareegga; dabcinta | Ku noqo qeexitaanka |
8.2 Hababka Fashilka Caadiga ah - Codsiyada Macdanta
| Habka Guul-darreysiga | Sababta Koowaad | Ka Hortagga |
|---|---|---|
| Xidhashada Flange-ka Hore ee Bilawga ah | Hawlgal daran oo dhinaca jiirada ah; gaari hoostiis oo aan si fiican loo habayn; xiisad xad dhaaf ah oo wadada ah | Yaree hawlgalka jiirada dhinac-dhinac; hubi iswaafajinta; ilaali xiisadda saxda ah |
| Suuxdinta Qabsashada | Cilad ku timaadda shaabad taasoo keenta wasakh iyo lumis saliideed | Kormeer joogto ah oo shaabad ah; beddel waqtigeeda ah |
| Rim Idler ah oo jaban | Culays aad u daran; daal agab; wax soo saar aan caadi ahayn | Ka fogow shoogga; kormeer dhacdooyinka saameynta kadib; ilo laga helay soo saaraha sumcadda leh |
| Usha Bent Idler | Saameyn daran oo dhinaca ah oo leh dhagaxyo ama caqabado | Tababarka hawlwadeenka; ka fogaanshaha caqabadaha |
| Xidhashada Raad-raaca aan sinnayn | Gaariga hoostiisa oo aan si fiican loo habayn; silsilad tareen oo duugowday | Hubi iswaafajinta; beddel silsiladda iyo qalabka aan la isku xidhin sida la isku waafajiyay |
8.3 Talooyinka Beddelka
| Xaalad | Talo soo jeedin | Sababta |
|---|---|---|
| Guuldarradii Hal-Duuliye | Beddel qofka caajiska ah haddii silsiladda raadadku muujiso xirasho yar | Kharash-ool ah; waqtiga ugu yar ee shaqada laga fariisiyo |
| Xidhashada Ciyaalka iyo Silsiladda | Beddel qofka aan shaqaynayn iyo silsiladda raadraaca sida la isku daray | Waxay ka hortagtaa isku dheelitir la'aanta garoonka; waxay kordhisaa cimriga adeegga |
| Dib-u-habeyn Dhammaystiran oo ku saabsan Gaadiidka Hoostooda | Ku beddel dhammaan qaybaha (boolal, kuwa aan shaqayn, kuwa duuba, silsiladaha) isku mar | Cimriga ugu badan ee adeegga; waxqabadka ugu wanaagsan |
| Hawlgallada Macdanta | Jadwal u samee beddelka inta lagu jiro dayactirka la qorsheeyay | Waxay yareysaa wakhtiga wax soo saarka oo yaraada |
9. Shaxda Kooban ee Tilmaamaha Farsamada
| Halbeegga | Faahfaahinta |
|---|---|
| Lambarka Qaybta OEM | 14C0197 |
| Moodooyinka La Iswaafajin Karo | LIUGONG CLG970, CLG970E, CLG975, CLG975E |
| Nooca Qaybta | Raad-raaca Hore ee Idler / Hagaha Isku-xidhka Giraangiraha |
| Alaab | Bir daawaha 50Mn / 40Cr / 42CrMo ah oo la been abuuray |
| Dhexroorka Dibadda | 650–750 mm |
| Dhererka Flange-ka | 25–32 mm |
| Adkaanta Dusha sare | HRC 52–58 (adag oo la xoojiyay) |
| Qoto dheer ee Kiiska | 6–10 mm |
| Nooca sitaha | Kubad is-waafajinaysa oo laba saf ah ama duuban oo wareegsan |
| Nooca Shaabadda | Shaabad wejiga ah oo sabeynaysa + shaabad bushimo radial ah (caqabado badan) |
| Saliidayn | Saliid EP oo lithium-comfound ah oo hore loo buuxiyey |
| Nolosha Adeegga | 5,000–8,000 saacadood oo shaqo ah (xaalado caadi ah) |
| Heerkulka Hawlgalka | -30°C ilaa +85°C (-22°F ilaa +185°F) |
| Shahaadada | ISO 9001: 2015 |
10. Gunaanad
Qodayaasha LIUGONG CLG970 iyo CLG975 waxay matalaan maalgashi raasumaal oo muhiim ah oo loogu talagalay shirkadaha macdanta qoda, kuwa ka shaqeeya qodista, iyo qandaraaslayaasha dhismaha culus ee adduunka oo dhan. Golaha Raad-raaca ee Idler Assembly (14C0197) waa qayb muhiim u ah hawlgalka kaas oo la shaqeeya nidaamka xiisadda wadada si loo hubiyo isku-xidhka saxda ah ee wadada, maaraynta xiisadda, iyo nuugista shoogga.
CQC TRACK (HELI) waxay u taagan tahay soo saare ilo xirfadle ah oo leh is-dhexgal toosan oo buuxa, injineernimo bir-mareen oo horumarsan, hab-raacyo hubin tayo oo adag, iyo kaabayaasha silsiladda saadka ee caalamiga ah oo dhammaystiran. Qaybahayagu waxaa loo sameeyay inay buuxiyaan ama dhaafaan shuruudaha LIUGONG OEM, oo ay ku jiraan:
- Samaynta dharka xiran si loo helo qaab-dhismeedka hadhuudhka oo heer sare ah iyo iska caabbinta daalka
- Daaweynta kulaylka laba-hantida ah oo isku daraysa xudunta adag iyo dusha sare ee xirashada adag
- Mashiinka saxda ah oo leh dulqaad ±0.02 mm oo ku saabsan is-dhexgalka muhiimka ah
- Nidaamyada shaabadeynta caqabado badan leh si looga saaro wasakhowga deegaannada aadka u daran
- Raad-raac buuxa oo agab ah oo leh Warbixinnada Tijaabada Mill iyo shahaado
Maalgashigan injineernimada waxay hubinayaan waxqabad la isku halleyn karo oo ka jira deegaannada ugu baahida badan adduunka - laga bilaabo macdanta birta ee Australia iyo Koonfurta Ameerika ilaa hawlaha dheemanka iyo dahabka ee Afrika, laga bilaabo gobollada barafka leh ee Ruushka ilaa goobaha qodista ee Kuuriya, iyo mashaariicda kaabayaasha dhaqaalaha ee Koonfur-bari Aasiya ilaa hawlaha macdanta ee Waqooyiga Ameerika.
Wixii faahfaahin farsamo, weydiimaha qiimaha, ama dalabaadka qaybaha LIUGONG CLG970/CLG975 ee gaariga hoostiisa mara, la xiriir waaxda iibka caalamiga ah ee CQC TRACK lambarka taxanaha mashiinkaaga iyo shuruudaha gaarka ah.
Qoraa:
Waaxda Iibka Caalamiga ah ee CQC - Jack
Soo-saare Xirfadle ah oo ka kooban Qaybaha Raad-raaca ee Xamuulka Hoostiisa ee Shaqada Culus leh
Ku takhasusay xalalka qodista ee LIUGONG, SANY, KOMATSU, HITACHI, KOBELCO, iyo LIEBHERR
Soo-saare Shahaadaysan: HELI (CQC TRACK)
Afeef: Dhammaan lambarrada qaybaha iyo moodooyinka mashiinka ee la tixraacay waa ujeeddooyin aqoonsi iyo iswaafajin oo keliya. CQC TRACK waa soo-saare madax-bannaan oo ka kooban qaybaha tayada sare leh ee suuqa dambe iyo OEM. Dhammaan calaamadaha ganacsiga (oo ay ku jiraan LIUGONG, CLG, iyo noocyada la xiriira) waxay weli yihiin hantida milkiilayaashooda.
Qaybaha alaabta
-
Taayirada Tilmaamaha Jidka Volvo 14743661 EC900 / EC950 ...
-
Qodiyaha Sumitomo SH240 hagaajiyaha raadadka assy SH...
-
Hyundai (P/N:81ND-13050) R800-FRONT idler assem...
-
Qalabka cusub ee qodista qodista ee loogu talagalay qodista SK350 SK450...
-
Qaybaha Gaariga Hoostiisa ee Qodista Idler Front Idler...
-
Qalabka CAT325/329 ee hore ee aan la isticmaalin (57700411; CR588...
