I-KOMATSU KM3542 22U3000020 22U3000021 PC200-7 PC220-7 PC240-7 I-Track Top Roller Assembly / I-Carrier Roller Assy / Ukwenziwa koBugcisa I-EXC Inxalenye yesithuthi esingaphantsi kwesithuthi esilandelelweyo / I-CQC TRACK
Izixhobo ze-KOMATSU PC200-7/PC220-7/PC240-7 Crawler Excavator Undercarriage
Indibano yeRoller/Roller yoMthwali esemgangathweni we-OEM
Amanani eCandelo: KM3542 22U3000020 22U3000021
Iimodeli ezihambelanayo: PC200-7, PC220-7, PC240-7 Series
Umenzi oyingcali weenxalenye ze-EXC Tracked Undercarriage:I-CQC TRACK (HELI)
1. Isishwankathelo soBugcisa: Ubunjineli bokuGcina iiMoto ezingaphantsi kwesithuthi esifanelekileyo kwiiKomatsu Excavators
Uthotho lweKomatsu PC200-7, PC220-7, kunye nePC240-7 zimele umgangatho wehlabathi wee-hydraulic excavators eziphakathi kudidi lweetoni ezingama-20–24. Ezi matshini zaziwa ngokubanzi ngokuqina kwazo, ukusebenza kakuhle kwepetroli, ukuphendula kakuhle kwe-hydraulic, kunye nokuthembeka ngokubanzi. Zisetyenziswa kuzo zonke iintlobo zezicelo zokufuduka komhlaba—ukusuka kulwakhiwo lwedolophu kunye nophuhliso lweziseko ukuya kwimisebenzi yemigodi, amahlathi, kunye neeprojekthi zobunjineli bokwakha ezinzima kwihlabathi liphela.
Inkqubo yokuhambisa ngaphantsi kwezi zithuthi zokumba iKomatsu yenzelwe ukuhlala ixesha elide kunye nokuzinza kokusebenza. Phakathi kwezinto ezibalulekileyo ze-chassis, iTrack Top Roller (Carrier Roller) Assembly idlala indima ebalulekileyo ekuxhaseni umtya wokubuyela ophezulu wetsheyini yetrekhi, ukuqinisekisa ukuhamba okutyibilikayo, ukunciphisa ukungqubana, kunye nokuthintela ukugoba kwendlela okunokubangela ukuba ihambe kakubi.
Olu xwebhu lubonelela ngeenkcukacha zobugcisa ezipheleleyo ze-Track Top Roller / Carrier Roller Assembly, echongwe ngamanani e-OEM e-KM3542, 22U3000020, kunye ne-22U3000021, ehambelana neemodeli ze-Komatsu PC200-7, PC220-7, kunye ne-PC240-7 excavator. Njengomvelisi ochwephesha ogxile kwiindawo ze-EXC (Excavator) ezilandelelwa phantsi kwesithuthi, i-CQC TRACK (HELI) inikezela ngezinto ezicwangciswe ngokuchanekileyo ezenzelwe ukuhlangabezana okanye ukudlula iinkcukacha zezixhobo zokuqala.
2. Indibano yeRoller ephezulu yeTrack Top / Carrier Roller – Inkcazo esebenzayo
2.1 Ukuchonga iCandelo
| Ukutyunjwa | Iinkcukacha |
|---|---|
| Iinombolo zeCandelo le-OEM | KM3542, 22U3000020, 22U3000021 |
| Uhlobo lweCandelo | I-Track Top Roller (ekwaziwa ngokuba yi-Carrier Roller, i-Upper Roller) |
| Iimodeli ezihambelanayo | IKomatsu PC200-7, PC200LC-7, PC220-7, PC220LC-7, PC240-7, PC240LC-7 |
| Ugqumo lweNgcali | Uthotho lwe-PC-7 (ixesha lemveliso lika-2003–2007); ikwahambelana neemodeli ezithile ze-PC-6 kunye ne-PC-8 |
| Indawo ngeTrack nganye | Ngokwesiqhelo iirola ezimbini zokuthwala kwicala ngalinye lomzila (enye phambili, enye emva) |
2.2 Imisebenzi Ephambili
I-Track Top Roller Assembly isebenza njengecandelo lokuxhasa umtya wokubuya ophezulu we-track chain. Imisebenzi yayo yokusebenza ibandakanya:
- Inkxaso yeTrack ephezulu: Ixhasa ubunzima betsheyini yetreyi ephezulu (inxalenye yetreyi engadibananga nomhlaba), ithintela ukugoba okugqithisileyo okunokuphazamisana nesakhelo setreyi okanye isakhiwo setreyi engaphantsi kwesithuthi.
- Ukunciphisa iingxabano: Ibonelela ngomphezulu ogudileyo nojikelezayo apho ikhonkco lomzila lihamba khona kwindlela yalo yokubuya ukusuka kwi-idler yangaphambili ukuya kwi-drive sprocket, nto leyo enciphisa kakhulu ukungqubana kunye nokulahleka kwamandla
- Isikhokelo seTrack Chain: Sigcina ulungelelwaniso olufanelekileyo lweTrack Chain ephezulu, sithintela intshukumo esecaleni enokubangela ukudibana nesakhelo seTrack okanye ezinye izinto ezingaphantsi kwesithuthi
- Ukudambisa ukungcangcazela: Kunegalelo kuzinzo lwendlela yokuhamba ngokunciphisa ukushukuma kweendlela ngexesha lokuhamba
- Ukukhuselwa kolwakhiwo lwe-Undercarriage: Kuthintela i-track chain ukuba ingadibani kwaye iguge kumphezulu wesakhelo se-track
3. Iinkcukacha zoBugcisa ezineenkcukacha
3.1 Ubunjineli boMzimba ojikelezayo
| Udidi lweNkcazelo | Iinkcukacha |
|---|---|
| Izinto eziphathekayo | Intsimbi ye-alloy ekumgangatho ophezulu eyenziweyo (40Mn2, 50Mn, okanye elinganayo) |
| Inkqubo yoMveliso | I-CNC machining evaliweyo kunye ne-flange surfaces echanekileyo |
| Ukubaleka koMphezulu woBulukhuni | Ukufakwa komoya kuqiniswe; 55–62 HRC enobunzulu becala obuyi-5–7 mm |
| Uqwalaselo lweFlange | Uyilo lweflange enye okanye ezimbini ngokuxhomekeke kwindawo; ngokuqhelekileyo uqwalaselo lwesikhokelo esiphakathi |
| Iprofayili yokunyathela | Irediyasi echanekileyo yomatshini ukuze ihambelane neprofayili ye-bushing ye-track chain |
| Ububanzi obungaphandle | Yenzelwe ukuhambelana nepitch ye-track chain yeKomatsu PC-7 series (malunga ne-135–140 mm) |
3.2 Inkqubo yeShaft kunye neBearing
| Udidi lweNkcazelo | Iinkcukacha |
|---|---|
| Izinto zoMngxuma | Intsimbi ye-alloy ye-carbon ephakathi ecinyiweyo nepholileyo enejenali ezithwala ngobuchule obuchanekileyo |
| Ububanzi beShaft | Iinkcukacha zothotho lweKomatsu PC-7 ezisemgangathweni |
| Uqwalaselo lweeBheri | Iibheringi zerola ezigobileyo ezimiqolo emibini okanye iibheringi zebhola ezinzulu ngokuxhomekeke kwindawo |
| Ukuthambisa ngeebheringi | Izaliswe kwangaphambili ngegrisi ye-EP ye-lithium-complex esebenza kakuhle, itywinwe ubomi bonke |
| Inkqubo yokutywina | Itywina yobuso edadayo (uhlobo lweDuo-Cone) enezitywina zangaphambili ze-labyrinth |
| Izinto zokutywina | I-Viton (FKM) kwizicelo ezisebenzisa ubushushu obuphezulu; i-NBR kwizicelo eziqhelekileyo |
| Uhlobo Lokukhwelisa | Ukufakelwa ngebholti kunye neewashers eziqinileyo kunye neenati zokutshixa; ibracket yokufaka idityaniswe kwisakhelo somzila |
3.3 Ubunjineli Bokuqina
| Uphawu | Iinkcukacha zoBunjineli |
|---|---|
| Ubomi bokudinwa | Yenzelwe iiyure zokusebenza ezingama-5,000–8,000 phantsi kweemeko eziqhelekileyo |
| Ukhuseleko lokugqwala | Iprimer yokulwa nokugqwala ene-topcoat yodidi lwemizi-mveliso; ityuwa etshizwayo ivavanyiwe iiyure ezingaphezu kwama-500 |
| Ixesha lokugcinwa | Ivaliwe ubomi bonke; akukho mfuneko yokuthambisa intsimi |
| Uluhlu lobushushu bokusebenza | -30°C ukuya ku +85°C (-22°F ukuya ku +185°F) |
4. Imveliso yoMthombo kunye noMvelisi: CQC TRACK (HELI)
4.1 Iprofayili yoMvelisi
I-HELI (CQC TRACK) ngumvelisi oqeqeshiweyo odumileyo kwihlabathi liphela ogxile kwizixhobo ze-EXC (Excavator) ezilandelelwa phantsi kwesithuthi. Le nkampani isebenza ngokudibanisa ngokupheleleyo, ilawula yonke inkqubo yemveliso ukususela ekukhethweni kwezinto eziluhlaza ukuya ekuhlanganisweni kokugqibela kunye novavanyo lomgangatho.
Amandla okuvelisa izinto eziphambili:
| Ubuchule | Inkcazo |
|---|---|
| Ukuyila okuValiweyo | Iimashini zokushicilela ezinkulu zetoni (iitoni eziyi-2,000–8,000) ukuze kubekho ukuhamba kakuhle kweenkozo kunye noxinano lwezinto ezisetyenzisiweyo |
| Unyango lobushushu | Ukuqina kwe-induction elawulwa yikhompyutha kunye nee-carburizing furnaces ezinobushushu obuchanekileyo kunye nolawulo lomjikelo |
| Umatshini Wokuchwetheza ngokuchanekileyo | Iziko lokujika le-CNC, iziko lokulungisa ngokuthe nkqo, kunye neenkqubo zokuwelda zerobhothi ezichanekileyo kwinqanaba le-micron |
| Indibano yesitywina | Indawo yokuhlanganisana yegumbi elicocekileyo ukuze kufakwe izitywini zobuso ezidadayo kunye neenkqubo zokuthwala |
| Uvavanyo loMgangatho | Ilabhoratri ye-NDT (Non-Destructive Testing) yangaphakathi ene-MPI, UT, kunye nobuchule bokuvavanya ubulukhuni |
4.2 Ingqwalasela yoBugcisa kwiMveliso
Njengomvelisi ozinikeleyo wezixhobo ze-EXC ezilandelelwa phantsi kwesithuthi, i-CQC TRACK igxile koku kulandelayo:
| Ingcali ekhethekileyo | Inkcazo |
|---|---|
| Ipotifoliyo epheleleyo ye-Undercarriage | Iirola ezisezantsi, iirola eziphezulu, ii-idlers, ii-sprockets, ii-track links, kunye nee-adjuster assemblies |
| Ukuhambelana kweKomatsu | Ukugubungela ngokubanzi ii-PC series excavators ukusuka kwi-PC30 ukuya kwi-PC800 |
| Iinkcukacha ze-OEM | Izinto ezenziwe ngokwemigangatho yezixhobo zokuqala ezinobukhulu kunye nemigangatho yesinyithi |
| Uphuculo oluqhubekayo | Ukuphuculwa kobunjineli okuqhubekayo ngokusekelwe kwidatha yokusebenza kwentsimi |
4.3 Iziseko zoQinisekiso loMgangatho
| Isilinganiselo soLawulo loMgangatho | Umgangatho wokuphunyezwa |
|---|---|
| Isiqinisekiso sezinto | Ukulandeleka ngokupheleleyo ngokwakhiwa kweekhemikhali kunye neengxelo zovavanyo loomatshini |
| Uvavanyo Olungonakalisiyo | Ukuhlolwa kweeParticle zeMagnetic (MPI) kuzo zonke izinto ezixonxiweyo; Uvavanyo lweUltrasonic (UT) kwiishafts |
| Ukuqinisekiswa koBume | Ukuhlolwa koMatshini woKulinganisa oQokelelweyo (i-CMM) kuzo zonke iindawo zokufakela kunye nobukhulu obubalulekileyo |
| Uvavanyo loBulukhuni | Ukuqinisekiswa kweRockwell (HRC) kuzo zonke iindawo eziphathwe ngobushushu; ukulinganiswa kobunzulu bekhesi |
| Uvavanyo loBulungisa beSeal | Ukuqinisekiswa koxinzelelo lweendibano zesitywina ezidadayo; uvavanyo lokuvuza |
| Ukuthobela iMigangatho | Iinkqubo zokuvelisa eziqinisekisiweyo ze-ISO 9001:2015 |
5. Izixhobo ezidityanisiweyo zeKomatsu PC200-7/PC220-7/PC240-7
Ukuze kugcinwe kakuhle iimoto ezingaphantsi kwesithuthi, iirola eziphezulu kufuneka zihlolwe kunye nezinye izinto ezincedisayo. I-CQC TRACK yenza ipotifoliyo epheleleyo yecandelo le-chassis yee-excavators zeKomatsu PC-7 series.
| Icandelo | Isalathiso se-OEM | Umsebenzi |
|---|---|---|
| Iirola zeTrack Bottom | 20Y-30-00100, 20Y-30-00110, 20Y-30-00120 | Ubunzima bomatshini wokuxhasa umtya osezantsi; ngesiqhelo yi-7–8 kwicala ngalinye |
| Umhambisi weTrack Front | 20Y-30-00040, 20Y-30-00050 | Isikhokelo sokuqhubela phambili kunye nolawulo loxinzelelo |
| I-Track Adjuster kunye ne-Recoil Spring | 20Y-30-00031, 20Y-30-00032 | Uxinzelelo lwe-hydraulic kunye nokufunxwa kwempembelelo |
| I-Drive Sprocket | 21N-30-10120, 21N-30-10121 | Ukubandakanyeka kokugqibela kwi-drive; kuhambelana nepitch ye-track chain |
| Indibano yeTrack Chain | I-Komatsu-spec | Ikhonkco lendlela evaliweyo nethanjiswe nge-lubricated (SLT) elinee-bushings |
| Izihlangu zeTrack | Ububanzi obuyi-400–700 mm | Igriza ezintathu (ilitye), igrosa ephindwe kabini (ngokubanzi), igrosa enye (idolophu), okanye ulungelelwaniso lwerabha |
| I-Track Guard | 20Y-32-00110, 20Y-32-00120 | Ikhusela i-undercarriage kwinkunkuma kunye neempembelelo ezingalindelekanga |
5.1 Uqwalaselo lweModeli yeSithuthi esingaphantsi kwesithuthi
| Imodeli | Ubunzima bokusebenza (kg) | Iirola ezisezantsi ngecala ngalinye | Iirola eziphezulu ngecala ngalinye | Uluhlu lobubanzi bezihlangu zeTrack |
|---|---|---|---|---|
| PC200-7 | 19,500–20,500 | 7 | 2 | 500–600 mm |
| PC200LC-7 | 20,500–21,500 | 8 | 2 | 600–700 mm |
| PC220-7 | 22,500–23,500 | 7 | 2 | 600–700 mm |
| PC220LC-7 | 23,500–24,500 | 8 | 2 | 600–700 mm |
| PC240-7 | 24,000–25,000 | 8 | 2 | 600–700 mm |
| PC240LC-7 | 25,000–26,000 | 8–9 | 2 | 600–700 mm |
6. Izicelo zeMarike yeHlabathi kunye noLungiso lweNgingqi
Izixhobo ze-CQC TRACK zenzelwe iimeko ezahlukeneyo zokusebenza kwiimarike ezinkulu zehlabathi. Uthotho lweKomatsu PC-7 lusetyenziswa ngokubanzi kwezi ndawo zilandelayo, nganye ineembono ezithile zokusebenza:
| Ummandla | Indawo yokusebenza | Izinto eziqwalaselwayo kwiCandelo |
|---|---|---|
| Amazantsi emelika | Umswakama ophezulu, umhlaba we-laterite, ukusetyenziswa kwemigodi, ukuphakama kwe-Andean | Iingubo eziphuculweyo zokulwa nokugqwala; iinkqubo zokuvala eziqinileyo zokuthintela amasuntswana amancinci; uyilo oluhlala ixesha elide lokunxiba |
| Afrika | Ukukrazulwa okukhulu kwesanti kunye negranite, amaqondo obushushu aphezulu, imisebenzi yokwemba ekude | Iifomyula zegrisi ezishushu kakhulu; Iiseal zeViton zokumelana neekhemikhali; ulwakhiwo oluqinileyo lwexesha elide lenkonzo |
| IRashiya / iCIS | Amaqondo obushushu angaphantsi kwe-zero (-40°C), umhlaba oqandisiweyo, ikhephu, umkhenkce, i-permafrost | Igrisi ethwala ubushushu obuphantsi; iifomyula zentsimbi ezinokuqina okuphuculweyo kobushushu obuphantsi; izitywina ezilungiselelwe ukuqala ngokubandayo |
| Phakathi empuma | Ukuguguleka kwesanti, ubushushu obugqithisileyo (50°C+), umhlaba wentlango, iimeko ezinamatye | Izitywino ezingabandakanyi isanti; izihlangu eziqinileyo zokuthambisa eziqinileyo zokumelana nokukhukuliseka; izixhobo zesitywino ezishushu kakhulu |
| iYurophu | Ukwakhiwa kwedolophu, imithetho yokusingqongileyo, imiqathango yengxolo, iindawo ezahlukeneyo zomhlaba | Ukuthobela uphawu lwe-CE; uyilo lweprofayili yengxolo ephantsi; izithambisi ezihambelana nendalo; imigangatho echanekileyo yobukhulu |
| amantla Emelika | Ukwembiwa kwemigodi, imisebenzi yemigodi, amahlathi, ukwakhiwa kwemibhobho, isivumelwano ngokubanzi | Ukuthobela imigangatho ye-ANSI/SAE; ukufumaneka ngokupheleleyo kwezixhobo zokuthwala impahla; ukufumaneka kwezixhobo ngokukhawuleza |
7. Iimpawu zobugcisa kunye nokuGqwesa koBunjineli
7.1 Ubuchwepheshe beSeal yoBuso obuDadayo
I-roller assembly ephezulu ibandakanya ii-Duo-Cone floating face seals, ezibonelela ngokuthembeka okugqwesileyo:
| Uphawu | Inzuzo |
|---|---|
| Ukususwa kwezinto ezingcolisayo | Ithintela ukungena kwesanti, udaka, kunye namasuntswana arhabaxa anokutshabalalisa ngokukhawuleza iibheringi |
| Ukugcinwa kweLubricant | Igcina ukuthambisa kuqinile ixesha elide, isusa iimfuno zokuthambisa imihla ngemihla |
| Ukunyamezela ukuphambuka kweShaft | Ilungelelanisa ukungalingani okuqhelekileyo kokusebenza ngaphandle kokusilela kwesitywina |
| Ubomi beNkonzo | Yenzelwe ukusebenza ubomi bonke ngaphandle kokutshintshwa kwesitywina phantsi kweemeko eziqhelekileyo |
7.2 Umphezulu wokubaleka oqinisiweyo we-Induction
I-roller tread iqiniswa ngokuchanekileyo ukuze kufezekiswe iimpawu ezifanelekileyo zokunxiba:
| Ipharamitha | Inkcazo | Inzuzo yoBunjineli |
|---|---|---|
| Ubunzima bomphezulu | 55–62 HRC | Ukumelana nokuguguleka okungaqhelekanga ngokuchasene ne-track chain bushings |
| Ubunzulu beTyala | Ubunzulu obulawulwayo obuyi-5–7 mm | Ixesha elide lokuguguleka ngelixa kuthintela ukwaphuka okubuthathaka |
| Ukuqina Okungundoqo | Ukuqina okugciniweyo | Ukumelana neempembelelo; kuthintela ukuqhekeka phantsi kwemithwalo yokukhwaza |
| Nxiba Ubomi | iiyure ezi-5,000–8,000 | Ukuncipha kokuphindaphinda kokutshintshwa; ixabiso lilonke eliphantsi lobunini |
7.3 Ukukhetha iiBheri ezichanekileyo
Uqwalaselo lokuthwala lulungiselelwe iimfuno ezithile zezicelo eziphezulu ze-roller:
| Ipharamitha | Inkcazo |
|---|---|
| Umthamo woMthwalo weRadial | Ixhasa ubunzima be-chain ephezulu kunye nokumelana okuncinci kokuqengqeleka |
| Umthamo woMthwalo we-Axial | Iyamelana namandla asemacaleni ngexesha lokujika nokusebenza kokuthambeka ecaleni |
| Ukunyamezelana Okungalunganga | Ivumela ukuphambuka okuncinci kwesakhelo somkhondo ngexesha lokusebenza |
| Umthamo wegrisi | Idama elilungiselelwe ubomi obude benkonzo |
8. Ukuqinisekiswa kokuthengwa kunye nokuHlangana
8.1 Amanyathelo okuqinisekisa ukuthengwa kwangaphambili
- Ukuqinisekiswa kweModeli yoMshini: Qinisekisa uyilo oluchanekileyo lwemodeli (PC200-7, PC200LC-7, PC220-7, PC220LC-7, PC240-7, PC240LC-7)
- Ukuqinisekiswa kweNombolo yeCandelo le-OEM: Qinisekisa inombolo yenxalenye yerola ephezulu ngokuchasene namaxwebhu omatshini:
- KM3542 (inombolo yenxalenye yeKomatsu)
- 22U3000020 (irola ephezulu ethile yePC200-7/PC220-7)
- 22U3000021 (i-roller ephezulu ethile ye-PC240-7 kunye neenguqulelo ze-LC)
- Ukuqinisekiswa kweNdawo: Qinisekisa inani leerola eziphezulu ezifunekayo kwicala ngalinye lomkhondo (ngesiqhelo zibe 2 kwicala ngalinye)
- Uqwalaselo Lokukhwelisa: Qinisekisa ipateni yebholiti kunye nokuhambelana kwesibiyeli sokukhwelisa kunye nesakhelo sethrekhi
- Uvavanyo lweMeko yeTrack Chain: Qinisekisa ukuguguleka kweTrack Chain ukuqinisekisa ukuhambelana okufanelekileyo
8.2 Iindlela Zokufumana Izinto
| Itshaneli | Eyona ilungileyo | Iingenelo |
|---|---|---|
| I-Factory Direct (i-CQC TRACK – i-HELI) | Abanini beenqanawa ezinkulu, iinkampani zokuqeshisa izixhobo, abasasazi bamazwe ngamazwe, imisebenzi yemigodi | Ixabiso eliphantsi leyunithi, inkxaso yobugcisa ethe ngqo, amaxabiso omthamo, ukupakishwa okwenziwe ngokwezifiso |
| Inethiwekhi yoSasazo eGunyazisiweyo | Ukuthengwa kweyunithi enye, ukutshintshwa kwentsimi ngokukhawuleza, abakhi abancinci | Isitokhwe sendawo, ukuthunyelwa ngokukhawuleza, inkxaso yobugcisa ngolwimi lwasekuhlaleni |
9. Iingcebiso zoLondolozo kunye noThintelo lokungaphumeleli
9.1 Imigaqo yoHlolo oluQhelekileyo
| Indawo yokuhlola | Izihlandlo | Izalathisi |
|---|---|---|
| Ukunxiba iRoller Tread | Veki nganye | Ukuthambisa, ukuguguleka okungalinganiyo, ukunciphisa ububanzi, ukugoba |
| Imeko yeFlange | Veki nganye | Nxiba kwiiflanges zesikhokelo, ukuguqulwa, ukuqhekeka |
| Ukunyaniseka kweSitywina | Veki nganye | Ukuvuza kwegrisi, ungcoliseko olubonakalayo, umonakalo wetywina, ukuqokelelwa kwenkunkuma yangaphandle |
| Ukujikeleza kweRoller | Nyanga nganye | Ukuxhathisa ukujikeleza, ingxolo, ukudlala ngokugqithisileyo, ukungcangcazela |
| Iibholti zokuFaka | Nyanga nganye | Ukuqinisekiswa kwe-torque, ukugqwala, ukukhululeka |
9.2 Iindlela zokusilela eziqhelekileyo
| Imo Yokusilela | Isizathu esiPhambili | Uthintelo |
|---|---|---|
| Ukunxiba okungalinganiyo kweTread | Isithuthi sangaphantsi esingalunganga, ityathanga lomkhondo eligugileyo, uxinzelelo olungafanelekanga lomkhondo | Qinisekisa ulungelelwaniso lwendlela; tshintsha ityathanga kunye neerola njengoko zihambelana; gcina uxinzelelo olufanelekileyo |
| Ukunxiba kweFlange | Ukujika kakhulu kwiindawo eziqinileyo, ukusebenza kwethambeka ecaleni, ukungahambi kakuhle kwendlela | Nciphisa ukujika okubukhali kwiindawo eziqinileyo; hlola rhoqo; qinisekisa ukulungelelana |
| Ukusilela kweSitywina | Ukungena kongcoliseko, ukonakala kobudala, ukufakwa okungafanelekanga | Ukucoca rhoqo; ukutshintshwa ngexesha elifanelekileyo xa kufunyenwe ukuvuza; iinkqubo ezifanelekileyo zokufakela |
| Ukubeka iibheringi | Ukulahleka kwezithambisi, ukugqithiswa kakhulu, umonakalo kwimpembelelo, ukungena kongcoliseko | Kuphephe ukulayisha izinto ezibangela ukushaqeka; hlola emva kweziganeko zengozi; gcina ukuthembeka kwesitywina |
| Ukubeka amanqaku kwi-Shaft | Ukungasebenzi kakuhle kwesitywina okuvumela ukungena kongcoliseko | Buyisela izitywini ngoko nangoko xa kufunyenwe ukuvuza; hlola umngxuma ngexesha lokutshintshwa kwesitywini |
9.3 Iingcebiso zokutshintsha
| Imeko | Ingcebiso |
|---|---|
| Ukusilela kweRoller enye | Tshintsha i-roller nganye ukuba ezinye ii-roller azibonakali zigugile kakhulu kwaye zisekwixesha lokusebenza |
| Ukunxiba iiroller ezininzi | Buyisela iseti epheleleyo kwicala ngalinye ukuze usebenze ngokulinganayo kwaye unxibe ngendlela elungeleleneyo |
| Ukutshintshwa kweTyathanga | Tshintsha zonke iirola eziphezulu ngaxeshanye nge-track chain ukuze zinxibe ngendlela efanayo |
| Ukutshintshwa kweRoller esezantsi | Hlola iirola eziphezulu xa utshintsha iirola ezisezantsi; zitshintshe ukuba kukho ukuwohloka okukhulu |
10. Isiphelo
Ii-excavator zeKomatsu PC200-7, PC220-7, kunye nePC240-7 zaziwa kwihlabathi liphela njengezinye zeemashini ezithembekileyo nezivelisayo kudidi lwazo. Iinkqubo zazo zokuhambisa ngaphantsi kwesithuthi, kuquka iTrack Top Roller / Carrier Roller Assembly (KM3542 / 22U3000020 / 22U3000021), zenzelwe ukuqina nokusebenza kakuhle. I-roller ephezulu, nangona ithwala umthwalo omncinci kune-roller yayo esezantsi, ibalulekile ekugcineni ulungelelwaniso olufanelekileyo lwendlela, ukunciphisa ukungqubana, kunye nokuqinisekisa ukuhamba okuthe tye nokuzinzileyo kuzo zonke iintlobo zomhlaba.
I-CQC TRACK (HELI) imele njengomvelisi ochwephesha ogxile kwiindawo ze-EXC ezilandelelwa phantsi kwesithuthi, kunye nokuhlanganiswa okuthe nkqo, amandla onyango lobushushu oluphambili, iinkqubo zokuqinisekisa umgangatho eziqinileyo, kunye neziseko zophuhliso lwehlabathi lonke. Izixhobo zethu zenzelwe ukuhlangabezana okanye ukudlula iinkcukacha ze-Komatsu OEM, ukuqinisekisa ukusebenza okuthembekileyo kwiindawo zokusebenza ezifuna kakhulu kwihlabathi liphela—ukusuka kwimigodi yaseMzantsi Melika nase-Afrika ukuya kwiindawo zokwakha zaseYurophu naseMntla Melika, kunye nakwiindawo ezibandayo zaseRashiya ukuya kumhlaba wentlango kuMbindi Mpuma.
Ukuze ufumane iinkcukacha zobugcisa, imibuzo ngamaxabiso, okanye ukufaka iiodolo zezinto ezingaphantsi kwemoto yeKomatsu PC-7, nxibelelana nesebe lentengiso lamazwe ngamazwe leCQC TRACK ngenombolo yakho yothotho lomatshini kunye neemfuno ezithile.
Umbhali:
ISebe leNtengiso laMazwe ngaMazwe le-CQC – uJack
Umenzi oyingcali weenxalenye ze-EXC Tracked Undercarriage
Ingcali kwiKomatsu Excavator Undercarriage Solutions
Umenzi oQinisekisiweyo: HELI (CQC TRACK)
Isikhanyeli: Zonke iinombolo zeenxalenye kunye neemodeli zoomatshini ezikhankanyiweyo zenzelwe ukuchonga kunye nokuhambelana kuphela. I-CQC TRACK ngumvelisi ozimeleyo wezinto ezithengiswa emva kwemarike kunye ne-OEM-quality components. Zonke iimpawu zorhwebo (kuquka i-KOMATSU, i-PC, kunye neempawu zeemodeli ezinxulumene nazo) zihlala ziyimpahla yabanini bazo.
Iindidi zemveliso
-
Izixhobo Zokwakha Izixhobo Zokumba Undercar ...
-
Izixhobo Zokwakha Zoomatshini Bokumba Isixhobo Sokuthwala ...
-
IHyundai 81ND12050 R700 R800 R850 Isithuthi Sokuthwala Itrekhi ...
-
I-E307 Top Roller Carrier I-Roller ephezulu ye-Ex ...
-
Iirola zokuthwala ii-excavator ze-HITACHI (YA60032167/92...
-
Irola ye-Excavator Carrier Roller EX300 Top Roller Upper...
