CATERPILLAR 1028153 7Y1805 1358903 E350 Track Front Idler Assy ama Track Guide Kooxda Giraangiraha / Qaybaha Chassis-ka ee culus ee la raadraacay Isha Warshadda iyo Soo-saaraha / CQC TRACK
CATERPILLAR 1028153 7Y1805 1358903 E350 Track Front Idler Assembly /Kooxda Giraangiraha Hagaha Raad-raaca
Warshadda iyo Soo-saaraha Qaybaha Chassis-ka ee La Socodsiiyay ee Culus
Qalabka Taayirada Hore ee Tayada OEM / Tilmaamaha
Soo-saaraha Isha:CQC TRACK
1. Dulmar Farsamo: Injineernimo Heer Sare ah oo loogu talagalay Qodayaasha Taxanaha Caterpillar 350
Taxanaha Caterpillar 350—oo ay ku jiraan E350, 350L, iyo noocyada la xiriira—waxay ka dhigan tahay aasaaska injineernimada mashiinnada culus ee Mareykanka ee qaybta qodayaasha heerka 50-55 metric ton. Mashiinnadan adag waxaa si caalami ah loogu adeegsadaa hawlaha qodista, mashaariicda dhismaha ee culus, codsiyada macdanta, iyo horumarinta kaabayaasha dhaqaalaha ee Koonfurta Ameerika, Afrika, Ruushka, Australia, Kuuriya, iyo meelo ka baxsan. Taxanaha Caterpillar 350 waxaa caan ku ah cimri dhererkiisa, adeeggiisa, iyo awoodda uu u leeyahay inuu u adkeysto xaaladaha shaqada ee adag.
Golaha Kooxda Waddada ee Waddada (Track Front Idler Assembly)Kooxda Giraangiraha Hagaha Raad-raaca) , oo ay aqoonsadeen lambarrada qaybaha Caterpillar OEM 1028153, 7Y1805, iyo 1358903, waa qayb muhiim u ah hawlgalka gaariga hoostiisa kaas oo u adeega hagitaanka hore iyo nidaamka maaraynta xiisadda ee silsiladda tareenka qodaha. Iyada oo ku taal hore ee gaariga hoostiisa, qaybtani waxay la shaqaysaa laanta dambe ee wadista si ay u ilaaliso isku-xidhka wadada, u nuugo culaysyada saameynta, iyo u taageerto qayb muhiim ah oo ka mid ah miisaanka hawlgalka mashiinka.
Dukumeentigani wuxuu bixiyaa tilmaamo farsamo oo dhammaystiran oo loogu talagalay Qalabka Caterpillar 1028153/7Y1805/1358903 Track Front Idler Assembly, oo la jaan qaadaya E350, 350L, iyo moodooyinka qodayaasha Caterpillar ee la xiriira. Iyada oo ah warshad iyo soo-saare ka socda qaybaha EXC chassis-ka ee xirfadleyda ah ee la socda shaqada culus, CQC TRACK (HELI) waxay bixisaa qaybaha gaariga hoostiisa mara ee tayada OEM ee loo sameeyay inay buuxiyaan ama ka gudbaan qeexitaannada qalabka asalka ah ee macdanta, qodista, iyo codsiyada dhismaha culus ee adduunka oo dhan.
2. Qeexitaanka Shaqada: Doorka Muhiimka ah ee Qofka Hore u Jeeda
2.1 Hawlaha Aasaasiga ah
Golaha Idler-ka ee Track Front wuxuu u adeegaa afar hawlood oo isku xiran oo muhiim u ah waxqabadka qodayaasha iyo cimriga dheer ee xamuulka hoostooda:
| Shaqada | Sharaxaad | Saamaynta Hawlgalka |
|---|---|---|
| Hagidda Raad-raaca iyo Xakamaynta Jihada | Waxay u adeegtaa hagaha ugu horreeya ee silsiladda tareenka, iyadoo hubinaysa isku-dubbarid habboon iyo jihada safarka toosan | Waxay ka hortagtaa ka-noqoshada raad-raaca; waxay hubisaa xasilloonida khadka toosan inta lagu jiro safarka dhulal kala duwan |
| Maareynta Xiisadda Raadinta | Ku rakiban gaari la dhaqaajin karo oo ku xiran habka xiisadda wadada, taasoo u oggolaanaysa hagaajinta saxda ah ee gariirka wadada | Waxay wanaajisaa xiriirka wadada-ilaa-dhulka; waxay ka hortagtaa xirashada xad-dhaafka ah; waxay awood u siisaa ka saarista wadada si loo dayactiro |
| Qaybinta Culayska iyo Nuugista Saamaynta | Waxay taageertaa qayb ka mid ah miisaanka mashiinka waxayna nuugtaa culaysyada saameynta bilowga ah ee ka imanaya caqabadaha, dhagaxyada, iyo dhulka aan sinnayn | Waxay ka ilaalisaa wadista ugu dambeysa iyo qaabka raadraaca waxyeelada shoogga uu keeno; waxay dheereysaa cimriga gaariga hoostiisa mara |
| Xiriirka Raad-raaca | Waxay bixisaa dusha qaloocan oo isku xidhka wadada ay ku wareegaan, taasoo hubinaysa isku xidhnaan siman iyo yaraynta iska caabinta isku dhaca | Waxay yareysaa luminta korontada; waxay kordhisaa cimriga silsiladda socodka; waxay hagaajisaa hufnaanta shidaalka |
2.2 Aqoonsiga Qaybaha
| Magacaabista | Faahfaahin |
|---|---|
| Lambarada Qaybaha OEM | 1028153, 7Y1805, 1358903 |
| Nooca Qaybta | Raad-raaca Hore ee Idler / Hagaha Isku-xidhka Giraangiraha |
| Moodooyinka La Iswaafajin Karo | Caterpillar E350, 350, 350L, 3508, iyo qodayaasha taxanaha 350 ee la xiriira |
| Fasalka Mashiinka | Qod-qode culus oo 50–55 tan ah |
| Booska Mashiin kasta | 2 (hal dhinac halkii wado) |
| Tixraacyo Kale | 6055861, 4304193, 4737850 (oo lala xiriiriyo noocyada kala duwan ee LD350/E6015) |
3. Faahfaahsan Kala-soocidda Qaybaha & Tilmaamaha Farsamada
3.1 Injineernimada Giraangiraha Idler (Rim)
Taayirada aan shaqaynayn waa qaybta wareegaysa ee muuqata ee si toos ah ula xidhiidha silsiladda tareenka. Injineernimadeedu waxay go'aamisaa cimriga xirashada iyo isku halaynta hawlgalka ee codsiyada adag.
| Qaybta Tilmaamaha | Faahfaahin |
|---|---|
| Alaab | Bir boron ama bir daawaha heer sare ah (50Mn, 55Mn2, 35MnB) |
| Habka Wax Soo Saarka | Samaynta qalabka CNC-ga ee xiran |
| Dhexroorka Dibadda | Waxaa loo farsameeyay si uu ula jaanqaado garoonka silsiladda orodka ee Caterpillar 350 Series |
| Naqshadeynta Flange-ka | Flanges laba-geesood ah oo ku yaal geesaha dibadda si loo ilaaliyo silsiladda raad-raaca togan |
| Dhererka Flange-ka | Loogu talagalay in laga hortago in la joojiyo raad-raaca inta lagu jiro hawlgalka jiirada dhinac-dhinac ah |
| Adkaanta Dusha Sare ee Socodka | Kobcinta oo adkaata; HRC 52–58 |
| Qoto dheer oo Kiis ah | 8-12 mm (adag qoto dheer oo loogu talagalay cimri dheer oo xirasho ah) |
| Godka Dhexe | Si sax ah loo farsameeyay si loogu habeeyo baloogyada hagaha silsiladda raadraaca si loo helo xasillooni dheeraad ah oo dhinaca ah |
3.2 Tilmaamaha Shafka Idler (Spindle)
Usha qalooca ah waxay u adeegtaa sidii dariiqa dhexe ee qaada culayska, iyadoo dhammaan culaysyada hawlgalka ka gudbinaysa giraangiraha qalooca ah una gudbinaysa qabsatooyinka taageerada iyo qaab-dhismeedka weyn.
| Qaybta Tilmaamaha | Faahfaahin |
|---|---|
| Alaab | Bir bir ah oo xoog badan oo la jiidi karo (41CrMo4 ama wax u dhigma) |
| Daaweynta Kulaylka | La damiyay oo la hagaajiyay (Q&T) si loo helo adkeysiga asaasiga ah; 280–350 HB (29–38 HRC) adkeysiga asaasiga ah |
| Dhammaadka Dusha Sare | Dhul sax ah oo loogu talagalay taabashada shaabadda ugu fiican |
| Iska caabinta Daalka | Loo farsameeyay cimri adeeg oo dheer iyadoo aan la qiimayn culayska |
| Xoog Laabista | Loogu talagalay inay u adkeysato waxyeellooyinka daran iyada oo aan lahayn isbeddel joogto ah |
3.3 Qaabeynta Nidaamka Rasaasta
Nidaamka raritaanka waa wadnaha isku-darka dadka aan shaqayn, isagoo go'aaminaya simanka wareegga iyo cimriga adeegga.
| Qaybta Tilmaamaha | Faahfaahin |
|---|---|
| Nooca dhalista | Biirta duuban ee dhexroor weyn leh ama bushings joornaal ah |
| Awoodda Xamuulka | Loogu talagalay culaysyada isku-dhafan ee radial (miisaanka mashiinka) iyo culaysyada dhidibka (xoogagga dhinaca inta lagu jiro leexashada) |
| Qaab-dhismeedka aan habboonayn | Sifada is-waafajinta ayaa magdhab u ah khaladaadka yar yar ee usha-ilaa-qalooca |
| Saliidayn | Waxaa hore loogu buuxiyay saliid EP ah oo lithium-complex ah oo tayo sare leh; cimriga oo dhan waa la xiray |
| Nolosha Qaadashada | Loogu talagalay 5,000–8,000 oo saacadood oo shaqo ah xaaladaha caadiga ah |
3.4 Injineernimada Nidaamka Shaabadaynta
Nidaamka shaabadeynta ayaa muhiim u ah cimriga adeegga ee goobaha macdanta iyo dhismaha halkaas oo boodhka, dhoobada, iyo walxaha xoqidda ay ku badan yihiin.
| Qaybta Tilmaamaha | Faahfaahin |
|---|---|
| Nooca Shaabadda | Nidaamka caqabado badan leh: shaabad wejiga birta ah oo sabeynaysa (nooca Duo-Cone) + shaabad hore oo labyrinth ah |
| Qalabka Shaabadda Aasaasiga ah | Shaabado weji bir ah oo heer sare ah oo leh dusha sare ee shaabadaysan oo si sax ah loo farsameeyay |
| Ka Saarista Wasakhowga | Shaabadaha hore ee labyrinth waxay ka hortagaan soo gelitaanka ciidda, dhoobada, iyo walxaha yaryar |
| Haysashada Saliidda | Naqshad aan daadanayn ayaa ilaalisa saliidaynta shidaalka muddo dheer oo adeeg ah |
| Nolosha Adeegga | Cimri cimri dheer ayaa lagu xidhay xaaladaha shaqada ee caadiga ah |
3.5 Is-dhexgalka Taabashada Jidka
Isku-dubaridka aan shaqaynayn wuxuu ka kooban yahay is-dhexgal sax ah oo loogu talagalay isku xirka nidaamka xiisadda wadada.
| Qaybta Tilmaamaha | Faahfaahin |
|---|---|
| Nooca Isdhexgalka | Madaxa dunta leh ama weelka been abuurka ah ee loogu talagalay habka hagaajinta |
| Isku xirka | Isku xidhka tooska ah ee dhululubada xiisadda (dufan ama nooca boolal) |
| Kala duwanaanshaha Hagaajinta | Loogu talagalay in lagu daboolo dhererka silsiladda tareenka inta lagu jiro cimriga adeegga |
| Habka Xiisadda | Dhululubo saliid leh (oo lagu hagaajin karo goobta iyada oo loo marayo qoryaha dufanka caadiga ah) |
4. Taxanaha Caterpillar 350 - Dulmar Guud ee Madal Mashiinka
4.1 Kala duwanaanshaha moodalka ee la jaanqaadaya
Golaha Idler-ka ee 1028153/7Y1805/1358903 wuxuu la jaan qaadayaa moodooyinka Caterpillar ee soo socda:
| Moodel | Sharaxaad |
|---|---|
| Caterpillar E350 | Qodiyaha Haydarooliga ee Heerka 350 Taxanaha ah |
| Digaag 350 | Magacaabista qaabka aasaasiga ah |
| Digaag 350L | Kala duwanaanshaha gaariga hoostiisa ku jira ee dheer si loo helo xasillooni la xoojiyay |
| Caterpillar 3508 | Kala duwanaansho leh qaab-dhismeedka matoorka gaarka ah |
| Moodooyinka la xiriira | E365, E375, E385, E450 (noocyo kala duwan ayaa wadaaga qaybaha gaariga hoostiisa ku jira ee iswaafajiya) |
4.2 Qeexitaannada Nooca Mashiinka
| Halbeegga | Qeexitaanka Caadiga ah |
|---|---|
| Miisaanka Hawlgalka | 50–55 metrik tan (110,000–121,000 rodol) |
| Awoodda Matoorka | Qiyaastii 250–300 kW (335–400 HP) |
| Ballaca Kabaha Raad-raaca | Xulashooyinka 600–800 mm |
| Qalabka Silsiladda Raad-raaca | Faahfaahinta Taxanaha Caterpillar 350 ee Caadiga ah |
4.3 Deegaannada Codsiga
Taxanaha Caterpillar 350 waxaa loogu talagalay:
- Hawlgallada Qodista Dhagaxa: Qodista dhagaxa, wax soo saarka aasaasiga ah, rarista kuraasta
- Dhismaha Culus: Mashruucyo dhul-dhis oo baaxad weyn leh, oo kaabayaasha dhaqaalaha ah
- Taageerada Macdanta: Ka saarista culayska xad-dhaafka ah, maaraynta agabka
- Burburinta: Burburinta dhismaha iyo qaab-dhismeedka oo leh lifaaqyo gaar ah
- Maareynta Agabka: Maareynta kaydka, hawlaha dekadda
5. Soo-saaraha Isha: CQC TRACK (HELI) – Warshadda Isha Qaybaha Chassis-ka ee Shaqada Culus La Raad-raacay
5.1 Astaanta Soo-saaraha
CQC TRACK (oo ku shaqeysa xiriirka HELI Group) waa soo saare gaar ah iyo alaab-qeybiye qaybaha chassis-ka ee la raadraacay ee culus, oo fadhigiisu yahay Quanzhou, Shiinaha - xarun caalami ah oo loogu talagalay qaybaha mashiinnada dhismaha. Shirkaddu waxay ilaalisaa is-dhexgalka toosan ee buuxa ee geeddi-socodka wax-soo-saarka, laga bilaabo xulashada alaabta ceeriin ilaa isku-darka ugu dambeeya iyo tijaabinta tayada.
Awoodaha Wax Soo Saarka ee Muhiimka ah ee Qaybaha Shaqada Culus:
| Awoodda | Sharaxaad |
|---|---|
| Foorno Xiran oo Dhiman | Cadaadisyo foorno oo tayo sare leh si loo helo socodka hadhuudhka ugu fiican iyo cufnaanta walxaha |
| Daaweynta Kulaylka | Foornooyinka lagu adkeeyo kombiyuutarrada iyo kuwa lagu shido ee kaarboonaynta leh oo leh qaab-dhismeed heerkul sax ah |
| Adkaynta Qoto dheer | Habab gaar ah oo gaaraya qoto dheer oo kiis ah oo ah 8-12 mm si loo kordhiyo cimriga xirashada |
| Makiinadaha Sax ah | Xarumaha wareejinta CNC ee awoodda weyn leh iyo xarumaha mashiinka lagu sameeyo oo leh saxnaan heer micron ah |
| Isku-dubaridka Shaabadeynta | Deegaan nadiif ah oo loogu talagalay shaabadeynta wejiga iyo nidaamyada siddaha |
| Tijaabada Tayada | Shaybaarka NDT ee gudaha ku jira oo leh awoodo tijaabinta MPI, UT, iyo adkeysiga |
5.2 Habraacyada Hubinta Tayada
| Cabbirka Xakamaynta Tayada | Heerka Hirgelinta | Habka Xaqiijinta |
|---|---|---|
| Shahaadada Agabka | Raad-raac buuxa oo leh falanqaynta halabuurka kiimikada | Warbixinnada Tijaabada Warshadda (MTRs); falanqaynta muuqaalka |
| Tijaabada Aan Burburka Lahayn | Kormeerka Qaybaha Birlabta ah (MPI) ee qaybaha la been abuuray | Ogaanshaha dildilaaca meelaha muhiimka ah ee walbahaarka |
| Xaqiijinta Cabbirka | Kormeerka Mashiinka Cabbirka Isku-dubaridka (CMM) | Xaqiijinta dulqaadka saxda ah ee joornaalada sita iyo guryaha shaabadda |
| Tijaabada Adkaanta | Xaqiijinta Rockwell (HRC) dhammaan dusha sare ee kulaylka lagu daweeyay | Cabbirka qoto dheer ee dusha sare iyo kiiska |
| Tijaabinta Shaabadda ee Daacadnimada | Xaqiijinta cadaadiska ee isku-dhafka shaabadda sabeynaya | Tijaabinta daadinta ka hor inta aan la rarin |
| U hoggaansanaanta Heerarka | ISO 9001: Habab wax soo saar oo shahaado haysta oo 2015 ah | Xaqiijinta hanti-dhawrka dhinac saddexaad |
5.3 Injineerinka Birta ee Codsiyada Culus
CQC TRACK waxay shaqaaleysiisaa injineernimo bir-dhalineed oo horumarsan si loo gaaro dheelitirka ugu wanaagsan ee adkaanta, adkeysiga, iyo iska caabbinta daalka ee looga baahan yahay dadka aan shaqayn ee Caterpillar 350 Series:
| Fasalka Daawaha | Codsiga | Sifooyinka Muhiimka ah |
|---|---|---|
| Birta Manganese 50Mn/55Mn2 | Dadka caajiska ah ee shaqada culus qabta | Adkayn heer sare ah; iska caabin wanaagsan oo xirasho; awood adag oo qoto dheer |
| Birta Boron-ka 35MnB | Codsiyada xoogga la xoojiyay | Adkaynta oo la hagaajiyay; xoog daal oo la xoojiyay |
| 41CrMo4 Chromium-Molybdenum | Codsiyada aadka u shaqada badan | Adkayn heer sare ah; iska caabin daal oo heer sare ah |
Injineernimada Daaweynta Kulaylka Labada-Hanti:
- Demin iyo Xakameyn (Q&T): Jirka oo dhan oo la farsameeyay oo la adkaystay, la damiyay, ka dibna la hagaajiyay. Adkaanta asaasiga ah: 280–350 HB (29–38 HRC) — taasoo bixinaysa adkeysi ugu wanaagsan si loo nuugo saameynta.
- Adkaynta Dusha Sare ee Induction: Ka dib marka la dhammeeyo shaqada, dusha sare ee muhiimka ah ee la xidho waxay martaa adkaansho induction ah oo ku meel gaar ah. Adkaanta dusha sare: HRC 52–58 oo leh qoto dheer oo kiiska ah 8–12 mm — taasoo bixinaysa iska caabin xirasho oo heer sare ah iyadoo la ilaalinayo adkeysiga xudunta.
- Xaqiijinta Astaanta Adkaanta: Isku-xidhka Microhardness wuxuu hubiyaa kala-guurka la xakameeyey laga bilaabo dusha sare ee adag ilaa xudunta adag, isagoo ka hortagaya kala-soocidda ama kala-soocidda xudunta kiiska marka la saarayo saameynta.
6. Qaybaha Xamuulka Hoostiisa ee la xiriira ee Taxanaha Caterpillar 350
Dayactirka dhameystiran ee gaariga hoostiisa mara—oo muhiim u ah hawlgallada ay waqtiga shaqadu si toos ah u saamayso wax soo saarka—ciddiyaha hore waa in la qiimeeyaa iyadoo lala kaashanayo qaybaha dheeraadka ah. CQC TRACK waxay soo saartaa faylalka dhammaystiran ee qaybaha chassis-ka ee qodayaasha Caterpillar 350 Series.
| Qaybta | Tixraaca OEM | Shaqada | Qoraalka Isdhexgalka |
|---|---|---|---|
| Qalabka Darawalka | Kala duwan | Ka qaybgalka wadista kama dambaysta ah; wuxuu la mid yahay garoonka silsiladda orodka | Ku beddel silsiladda raadraaca sida nidaamka la isku daray |
| Isku-xidhka Silsiladda Raad-raaca | Caterpillar-spec | Silsilad xarig leh oo saliidaysan (SLT) oo leh buushado adag | Muhiim u ah isku dheelitirka saxda ah ee codka |
| Kabaha Raad-raaca | Ballacyo kala duwan | Grouser saddex geesood ah (dhagaxa) ee dhagaxa; hal grouser codsiyada guud | Ku habboon dhulka codsiga |
| Raad-raaca Badhtamaha | Kala duwan | Miisaanka mashiinka taageerada ee xarigga hoose ee wadada; caadi ahaan 7-8 dhinac kasta | Waa in lagu beddelaa qalab si loo qaybiyo xirashada siman |
| Roogyada Xamuulka Qaada (Sare) | 8E-4623 | Taageer xarigga soo celinta wadada sare; 2 dhinac kasta | Silsiladda hagaha tareenka ee ka sarreysa qaab-dhismeedka tareenka |
| Habeeyaha Raad-raaca & Guga Dib-u-soo-noqoshada | La xidhiidha caajiska | Cadaadiska Haydarooliga iyo nuugista saameynta | Si toos ah ula xiriir 1028153/7Y1805/1358903 idler |
6.1 Mabda'a Iswaafajinta Silsiladda Idler iyo Track
Qodayaasha Caterpillar 350 Series, qalabka hore ee aan shaqayn iyo silsiladda raadadka waa in loo qiimeeyaa inay yihiin nidaam isku mid ah. Ku shaqaynta qalab cusub oo aan shaqayn oo leh silsilad aad u duugowday (ama caksigeeda) waxay abuurtaa:
- Xidhashada Raad-raaca Degdegga ah: Qaab-dhismeedka xiriirka ee aan iswaafaqsanayn wuxuu burburiyaa dusha sare ee orodka
- Waxyeellada Buufinta: Cilad degdeg ah oo ku timaadda bushqadaha silsiladda tareenka
- Khatarta Ka-hortagga Raad-raaca: Ka-qaybgalka aan habboonayn wuxuu kordhiyaa suurtagalnimada simbiriirixan dhinaca ah
- Nolosha Adeegga oo La Yareeyay: 40-60% hoos u dhac ku yimid cimriga guud ee gaariga hoostiisa mara
6.2 Calaamadaha Cilladda Qaybaha
Dhibaatooyinka caadiga ah ee tilmaamaya in beddelka isku-dubaridka qalabka aan shaqaynayn loo baahan yahay:
| Astaanta | Sabab u Suurtagal ah | Tallaabada lagu taliyay |
|---|---|---|
| Giraangiraha Idler-ka ee Xiran | Xirashada caadiga ah ama silsiladda raadadka oo aan isku mid ahayn | Cabbir xirashada; beddel haddii dhimista dhexroorku ay dhaafto qeexitaanka |
| Buuqa Shiidida | Biirta dhaawacan ama cillad shaabad | Kormeer nidaamka booyadaha; beddel isku-darka |
| Daadashada Saliida | Cilad shaabaddeed | Beddel degdeg ah si looga hortago wasakhowga abuurka |
| Waddo dabacsan | Habka hagaajinta ee fashilmay | Kormeer nidaamka xiisadda; xaqiiji is-dhexgalka idler |
| Dildilaac ama Qallafsanaan | Waxyeello saameyn ama culays xad-dhaaf ah | Isla markiiba beddel si looga hortago guuldarro masiibo ah |
7. Codsiyada Suuqa Caalamiga ah iyo La-qabsiga Gobolka
Taxanaha Caterpillar 350 waxaa lagu farsameeyaa dhismaha culus iyo hawlaha qodista dhagaxa adduunka oo dhan. Qaybaha CQC TRACK waxaa lagu farsameeyay la-qabsiyo goboleed oo gaar ah si loo daboolo xaaladaha hawlgalka maxalliga ah iyo doorbidyada iibka.
7.1 Koonfurta Ameerika
| Halbeegga | La qabsiga |
|---|---|
| Deegaanka Hawlgalka | Hawlgallada Andean ee meelaha sare, gobollada macdanta birta, meelaha xeebaha ee qoyaanka badan leh |
| La qabsiga Qaybta | Dahaarka ka hortagga daxalka oo la xoojiyay; nidaamyada shaabadaysan ee culus si looga saaro walxaha yaryar |
| Doorbidka Iibsiga | Soo-saaridda tooska ah ee warshadda; xirmooyinka gaariga hoostiisa oo dhammaystiran; Dukumentiyada farsamada ee Isbaanishka/Boortaqiis |
7.2 Afrika
| Halbeegga | La qabsiga |
|---|---|
| Deegaanka Hawlgalka | Ciid/granite aad u daran, heerkul sare, iyo meelo fogfog |
| La qabsiga Qaybta | Qaacidooyinka saliidda heerkulka sare leh; Shaabadaha Viton; muddooyin adeeg oo la dheereeyay |
| Doorbidka Iibsiga | Dalabaadka badan ee howlaha macdan qodista/godka qodista; rarista weelasha lagu shubo; Dukumentiyada Ingiriisiga/Faransiiska |
7.3 Ruushka iyo CIS
| Halbeegga | La qabsiga |
|---|---|
| Deegaanka Hawlgalka | Heerkulka ka hooseeya eber (-40°C), baraf-cawlan, dhul barafaysan |
| La qabsiga Qaybta | Saliid heerkul hoose leh; bir leh adkeysi heerkul hoose oo la xoojiyay; naqshad jabka ka hortagga jabitaanka |
| Doorbidka Iibsiga | Qiimaha tooska ah ee warshadda; shahaado dhammaystiran; Tilmaamaha luqadda Ruushka |
7.4 Ustaraaliya
| Halbeegga | La qabsiga |
|---|---|
| Deegaanka Hawlgalka | Hawlgallada qodista, qodista macdanta birta, xoqidda sare, iyo meelaha fogfog |
| La qabsiga Qaybta | Nidaamyada shaabadda culus; naqshadda cimriga xirashada oo dheer; u hoggaansanaanta heerarka Australia |
| Doorbidka Iibsiga | Helitaanka qalabka gaariga hoostiisa mara oo dhammaystiran; keenista goobta miinada; taageero farsamo |
7.5 Kuuriya iyo Waqooyi-bari Aasiya
| Halbeegga | La qabsiga |
|---|---|
| Deegaanka Hawlgalka | Hawlgallada qodista, dhismaha magaalooyinka, codsiyada goobaha maraakiibta |
| La qabsiga Qaybta | Dulqaad cabbir sax ah; dhammaystir dusha sare oo tayo sare leh; Shahaadada KCS |
| Doorbidka Iibsiga | Dalabaadka yaryar ilaa kuwa dhexdhexaadka ah; rar degdeg ah; Dukumentiyada Kuuriya/Shiinaha |
7.6 Dhaqamada ugu Fiican Warshadaha
| Tababar | Faa'iido |
|---|---|
| Soo-saaris Toos ah oo Warshadeed | Qiimaha ugu hooseeya ee cutubka; taageero farsamo oo toos ah; qiimaha mugga |
| Qalabka Dhammaystiran ee Gaariga Hoostiisa | Qaybaha xirashada ee isku midka ah; cimri dheer oo adeeg ah |
| Jadwalka Dayactirka La Qorsheeyay | Waxay yareysaa joojinta wax soo saarka; miisaaniyad la saadaalin karo |
| Raad-raaca Qaybaha | Warbixinnada Tijaabada Warshadda; diiwaannada daaweynta kulaylka; u hoggaansanaanta ISO 9001: 2015 |
8. Xaqiijinta Iibsiga iyo Iswaafajinta
8.1 Tallaabooyinka Xaqiijinta Iibsashada Kahor
- Xaqiijinta Moodeelka Mashiinka: Hubi magaca saxda ah ee moodeelka (E350, 350, 350L, 3508) iyo lambarka taxanaha ah
- Xaqiijinta Lambarka Qaybta OEM: Xaqiiji lambarka qaybta aan shaqaynayn marka loo eego dukumeentiyada mashiinka:
- 1028153 (ururka koowaad ee dadka aan shaqayn)
- 7Y1805 (tixraac kale)
- 1358903 (tixraac dheeraad ah)
- Qaabeynta Gaariga Hoostiisa: Hubi tirada roogagga hoose ee dhinac kasta iyo ballaca kabaha ee raadraaca
- Qiimaynta Xaaladda Silsiladda Raad-raaca: Hubi xirashada silsiladda raad-raaca si loo hubiyo is-waafajin habboon
- Iswaafajinta Nidaamka Xiisadda: Hubi iswaafajinta dhululubada hagaajiyaha raadadka ee leh is-dhexgalka idler
8.2 Kanaallada Soo-dejinta
| Kanaal | Ugu Fiican | Faa'iidooyinka |
|---|---|---|
| Tooska Warshadda (CQC TRACK) | Shirkadaha macdan qodista/godka qodista, milkiilayaasha maraakiibta, qaybiyeyaasha | Qiimaha ugu hooseeya ee cutubka; taageero farsamo oo toos ah; qiimaha mugga; raad-raac buuxa |
| Shabakadda Qaybinta ee La Oggolaaday | Iibsi hal-cutub ah; beddelka degdegga ah ee goobta | Alaabada maxalliga ah; si degdeg ah loo diro |
9. Talooyinka Dayactirka & Ka Hortagga Fashilka
9.1 Hab-maamuuska Kormeerka Caadiga ah
| Barta Kormeerka | Soo noqnoqoshada | Tilmaamayaasha | Ficil |
|---|---|---|---|
| Xidhmada Tuurista Idler | Todobaadle | Yaraynta dhexroorka; qaab xidhasho aan sinnayn | Cabbir xirashada; jadwalka beddelka |
| Xaaladda Flange-ka | Todobaadle | Xirashada flange-ka; qaab-dhismeedka; dildilaac | Hubi khatarta ka-hortagga raad-raaca |
| Daacadnimada Shaabadda | Maalin kasta | Daadinta dufanka; wasakhowga muuqda | Beddelka shaabadda degdega ah haddii wax qaldamaan |
| Xaaladda Dhalista | Bille ah | Wareeg adag; buuq; ciyaar xad dhaaf ah | Beddelka beddelka; kormeer usha |
| Xiisadda Jidka | Maalin kasta | Daloosha ayaa ka baxday qeexitaanka | Hagaaji qeexitaannada CAT sida ku cad |
9.2 Hababka Caadiga ah ee Guul-darrooyinka
| Habka Guul-darreysiga | Sababta Koowaad | Ka Hortagga |
|---|---|---|
| Xidhashada Flange-ka Hore ee Bilawga ah | Hawlgal daran oo dhinaca ah; gaari hoostiis oo si khaldan loo habeeyay | Yaree jiirada dhinaca; hubi iswaafajinta |
| Suuxdinta Qabsashada | Cilad ku timaadda shaabad taasoo keenta wasakhowga | Kormeer joogto ah oo shaabad ah; beddel waqtigeeda ah |
| Rim Idler ah oo jaban | Culays aad u daran; wax soo saar aan heer sare ahayn | Isha laga soo xigtay soo saaraha sumcadda leh |
| Xidhashada Raad-raaca aan sinnayn | Gaariga hoostiisa oo aan si fiican loo habayn; silsilad tareen oo duugowday | Xaqiiji iswaafajinta; ku beddel sida isku-darka ah |
9.3 Talooyinka Beddelka
| Xaalad | Talo soo jeedin | Sababta |
|---|---|---|
| Guuldarradii Hal-Duuliye | Beddel qofka caajiska ah haddii silsiladda raadadku muujiso xirasho yar | Kharash-ool ah; waqtiga ugu yar ee shaqada laga fariisiyo |
| Xidhashada Ciyaalka iyo Silsiladda | Beddel qofka aan shaqaynayn iyo silsiladda raadraaca sida la isku daray | Waxay ka hortagtaa isku dheelitir la'aanta garoonka; waxay kordhisaa cimriga adeegga |
| Dib-u-habeyn Dhammaystiran oo ku saabsan Gaadiidka Hoostooda | Ku beddel dhammaan qaybaha (boolal, kuwa aan shaqayn, kuwa duuba, silsiladaha) isku mar | Cimriga ugu badan ee adeegga; waxqabadka ugu wanaagsan |
10. Shaxda Kooban ee Tilmaamaha Farsamada
| Halbeegga | Faahfaahinta |
|---|---|
| Lambarada Qaybaha OEM | 1028153, 7Y1805, 1358903 |
| Tixraacyo Kale | 6055861, 4304193, 4737850 |
| Moodooyinka La Iswaafajin Karo | Caterpillar E350, 350, 350L, 3508 |
| Nooca Qaybta | Raad-raaca Hore ee Idler / Hagaha Isku-xidhka Giraangiraha |
| Alaab | Bir daawaha ah oo 50Mn / 55Mn2 / 35MnB ah oo la been abuuray |
| Adkaanta Dusha sare | HRC 52–58 (adag oo la xoojiyay) |
| Qoto dheer ee Kiiska | 8–12 mm |
| Nooca dhalista | Biirta duuban ee qallafsan ama bushings joornaalka ah |
| Nooca Shaabadda | Shaabad wejiga birta ah oo sabeynaysa + shaabado hore loo xiray |
| Saliidayn | Saliid EP oo lithium-comfound ah oo hore loo buuxiyey |
| Nolosha Adeegga | 5,000–8,000 saacadood oo shaqo ah (xaalado caadi ah) |
| Heerkulka Hawlgalka | -40°C ilaa +85°C (-40°F ilaa +185°F) |
| Shahaadada | ISO 9001: 2015 |
11. Gunaanad
Qodayaasha Caterpillar 350 Series—oo ay ku jiraan moodooyinka E350, 350, iyo 350L—waxay matalaan halbeeg injineernimo mashiino culus oo Mareykan ah oo ku jira fasalka 50-55 mitirka tan. Mashiinnadan waxaa lagu farsameeyaa hawlaha qodista, dhismaha culus, iyo taageerada macdan qodista adduunka oo dhan, halkaas oo isku halaynta iyo cimri dhererku ay si toos ah u saameeyaan wax soo saarka iyo faa'iidada.
Golaha Jidka Hore ee Raad-raaca (1028153 / 7Y1805 / 1358903) waa qayb muhiim u ah hawlgal kaas oo haga silsiladda raad-raaca, maareeya xiisadda raad-raaca, oo nuugta culayska saameynta iyadoo taageeraysa qayb muhiim ah oo ka mid ah miisaanka hawlgalka mashiinka. Injineernimada qofka caajiska ah - oo leh sameynta qalabka xiran, adkaanta qoto dheer ee soo-gelinta (qoto dheer 8-12 mm, HRC 52-58), nidaamyada shaabadaynta ee caqabado badan leh, iyo dhismaha birta birta ah ee xoogga badan - si gaar ah ayaa loogu habeeyay xaaladaha adag ee laga helo qodista iyo codsiyada dhismaha culus.
CQC TRACK (HELI) waxay u taagan tahay warshad iyo soo-saare xirfadle ah oo leh isku-dhaf buuxa oo toosan, injineernimo bir-dhaliye oo horumarsan, hab-raacyo hubin tayo oo adag, iyo kaabayaal silsilad sahay oo caalami ah oo dhammaystiran. Qaybahayagu waxaa loo sameeyay inay buuxiyaan ama dhaafaan shuruudaha Caterpillar OEM, oo ay ku jiraan:
- Samaynta dharka xiran si loo helo qaab-dhismeedka hadhuudhka oo heer sare ah iyo iska caabbinta daalka
- Daawaynta kulaylka laba-hantida ah oo isku daraysa xudunta adag iyo dusha sare ee duugista adag (HRC 52–58)
- Adkaynta qoto dheer ee induction-ka oo leh qoto dheer oo kiis ah oo ah 8-12 mm si loo kordhiyo cimriga xirashada
- Mashiinka saxda ah oo leh dulqaad sax ah oo ku saabsan is-dhexgalka muhiimka ah
- Nidaamyada shaabadeynta caqabado badan leh si looga saaro wasakhowga deegaannada aadka u daran
- Raad-raac buuxa oo agab ah oo leh Warbixinnada Tijaabada Mill iyo shahaado
- ISO 9001: Habab wax soo saar oo shahaado haysta oo 2015 ah
Maalgashigan injineernimada ayaa hubiya waxqabad la isku halleyn karo oo ka jira deegaannada ugu baahida badan adduunka - laga bilaabo hawlaha qodista ee Koonfurta Ameerika iyo Australia ilaa goobaha dhismaha ee Afrika iyo Ruushka, iyo laga bilaabo mashaariicda kaabayaasha dhaqaalaha ee Kuuriya ilaa goobaha dhismaha culus ee Waqooyiga Ameerika iyo Yurub.
Wixii faahfaahin farsamo, weydiimaha qiimaha, ama si aad u dalbato qaybaha Caterpillar 350 Series ee gaariga hoostiisa mara, la xiriir waaxda iibka caalamiga ah ee CQC TRACK lambarka taxanaha mashiinkaaga iyo shuruudaha gaarka ah.
Qoraa:
Waaxda Iibka Caalamiga ah ee CQC - Jack
Warshadda iyo Soo-saaraha Qaybaha Chassis-ka ee La Socodsiiyay ee Culus
Ku takhasusay Xalalka Qodayaasha Caterpillar, Komatsu, Liebherr, SANY, HITACHI, KOBELCO, iyo LIUGONG
Soo-saare Shahaadaysan: HELI (CQC TRACK)
*Afeef: Dhammaan lambarrada qaybaha iyo moodooyinka mashiinka ee la tixraacay waa ujeeddooyin aqoonsi iyo iswaafajin oo keliya. CQC TRACK waa soo saare madax-bannaan oo ka kooban qaybaha tayada sare leh ee suuqa dambe iyo OEM. Dhammaan calaamadaha ganacsiga (oo ay ku jiraan CATERPILLAR, CAT, E350, iyo noocyada la xiriira) waxay weli yihiin hantida milkiilayaashooda.*
Qaybaha alaabta
-
SDLG 4110016138 E6650 Golaha Hore ee Idler | CQ...
-
VOLVO 118100030 14533156 14731469 609534 145201...
-
Komatsu PC200(KM1642) hore ee aan la garanayn...
-
HYUNDAI R210-7 R225-7 81N613010 Raad-raaca Idler Whe...
-
HITACHI YA60041974 ZX450 ZX470 ZX490 Raad-raaca Idle...
-
Volvo EC55,EC55B,EC60,EC60C,EC70,EC75,EC90,EC88...
