To reduce the wear of the walking parts of excavators, the old driver has a coup.Madagascar Excavator sprocket

To reduce the wear of the walking parts of excavators, the old driver has a coup.Madagascar Excavator sprocket

Excavator, as its name implies, its main function is to dig. However, the work of the excavator still needs the support of its walking parts. Once the excavator leaves the walking device, it will be difficult to move. The walking device, also known as chassis components, is mainly composed of chain plates, chain rails, supporting sprockets, supporting wheels and driving wheels. So, in order to prolong the service life of excavators, what measures should we take to reduce the wear and tear of walking parts of excavators?Madagascar Excavator sprocket

1. Avoid long-term immersion of excavators in soaked water.
Do not soak the bottom device in water for a long time. Especially some coastal cities. Because the excavator is soaked in water for a long time, it will not only rust the bottom, but also corrode the chassis once the salinity of the water is high.
Second, the bolts and nuts should be regularly inspected and reinforced, which can reduce the crawler wear.
Roller, crawler plate bolts, driving wheel mounting bolts, walking pipe bolts, etc., are easily loosened by vibration due to long-term working of the equipment. If you continue to operate the equipment with the bolts of the track shoes loosened, there may be a gap between the bolts and the track shoes, which may lead to cracks in the track shoes.
Third, try to avoid the excavator traveling on the inclined ground or suddenly turning.
If you repeatedly walk on the inclined ground for a long time or suddenly turn, it will lead to the joint between the side of the rail link and the side of the driving wheel and the guide wheel, which will lead to the increased wear degree. Therefore, in the process of operation, choose straight line and big turn as much as possible to prevent excessive wear and tear, which will take time and money.Madagascar Excavator sprocket
Point 4: If you find the roller that can’t run due to failure, you should repair it immediately.
If there are some idler wheels or roller wheels that can’t continue to run, and they still insist on working, it may cause the roller to wear off, or even lead to the wear of the rail chain links. Therefore, when the roller fails to operate normally, it is necessary to immediately stop the operation and repair it, so as to avoid other failures in time.
During the operation, the excavator will be worn to some extent, so in daily use, we should pay attention to regular inspection and maintenance of the excavator, and replace it in time if it is found to be badly worn.Madagascar Excavator sprocket