Do you know? Rollers can also be buttered! Nigeria Excavator sprocket
Many excavator drivers have encountered oil leakage from the rollers, and most of them will ignore them and wait for the rollers to be polished and replaced. Although it is almost impossible to repair after an oil leak, the rollers can also be buttered! After the butter is beaten, it can continue to be used for 2000 hours, just like no oil leakage. Nigeria Excavator sprocket
The inside of the roller is a bushing link, there is no bearing, and there is a lack of lubrication inside after oil leakage, so you can try to grease it to keep it lubricated. Nigeria Excavator sprocket
If you look closely, there is a hexagon socket screw on the common type of roller, some on the surface of the roller, and some on the outside of the main shaft. Nigeria Excavator sprocket
If the bolt is on the outside of the spindle, just unscrew the socket head cap screw and replace it with a grease fitting.
Then you can lift the grease gun and put butter in it. If it is a roller that leaks oil, it needs to be hit a lot for the first time. After that, when you hit the butter every day, you can take it with you three or four times. Nigeria Excavator sprocket
If the bolt is on the surface of the roller, it is not easy to do, and even if you can unscrew the hex bolt, you can only grease it once. If you want to replace it, try to replace the inner hexagon on the side of the spindle as much as possible. Even if the oil leaks, you can continue to use it with butter. Nigeria Excavator sprocket
Maintained in this way, toil leaking roller can be used for at least 2000 hours, which can help the owner save a lot of money. Nigeria Excavator sprocket
Post time: Jul-25-2022
