I-KOMATSU KM3244 / 2093000300 PC750 / PC800 / I-Carrier Roller / I-Upper Roller Assembly eyenziwe yi-HELI CQCTRACK

Indibano yerola yokuthwala yeKOMATSU PC750 kunye nePC800 esebenza kakuhle (P/N:KM3244, 2093000300Yenziwe ngobuchule yi-HE LI CQCTRACK ukuze ihlale ixesha elide kakhulu kwizixhobo ze-undercarriage ezinzima. Umgangatho ohambelana ne-OEM.

Umxholo:

Intshayelelo: Indima Ebalulekileyo YeeRoller ZeeCarrier Kwiinkqubo Zee-Excavator Undercarriage Systems

Ngaphakathi kwitshasi yomzila eqinileyo yee-hydraulic excavators ezinkulu ezifana ne-KOMATSU PC750 kunye ne-PC800, ubunzima besakhiwo esingaphezulu busasazwa kwaye bukhokelwa luluhlu lwezinto ezichanekileyo. Phakathi kwezi, i-Carrier Roller (Upper Roller) Assembly idlala indima ebalulekileyo. Zibekwe phezu kwesakhelo somzila, ezi rollers zixhasa ukuhamba okuphezulu kwekhonkco lomzila, zigcina ukugoba okufanelekileyo komzila (uxinzelelo), zikhokela indlela yokubuya komzila, kwaye zinciphisa ukushukuma ecaleni. Kwimigodi, ukumba, kunye nokusetyenziswa kokwemba okunzima okuqhelekileyo kochungechunge lwe-PC750/PC800, ukuthembeka kwezi rollers kuchaphazela ngokuthe ngqo uzinzo lomatshini, ubomi bomzila, kunye nempilo iyonke yesithuthi esingaphantsi komhlaba.

Iinkcukacha zobugcisa: KOMATSUKM3244 / 2093000300Indibano yeRoller yoMthwali

Le ndibano ithile yenzelwe ukuthatha indawo ye-OEM carrier roller kwi-KOMATSU PC750-6, PC750SE-6, PC800-6, kunye neemodeli ezihambelanayo. Yenzelwe ukuhlangabezana neenkcukacha ezichanekileyo zobukhulu, umthwalo, kunye nokusebenza ezifunekayo kwezi matshini.

• Inombolo yeCandelo le-OEM:KM3244, 2093000300
• Isicelo: KOMATSU PC750, ii-PC800 series excavators.
• Uhlobo:Irola yoMthwali ePhezulu(Irola yokubuyisela).
• Umsebenzi: Ixhasa ikhonkco eliphezulu lendlela, igcina uxinzelelo lwendlela, inciphisa ukungqubana kunye nokuguguleka ngexesha lokubuyela kwendlela.

Uhlalutyo loBunjineli kunye noMveliso yi-HE LI (I-CQCTRACK)

I-HE LI, esebenza phantsi kophawu lwemizi-mveliso i-CQCTRACK, igxile ekuveliseni izinto ezithwala abantu abanzima. Ukuveliswa kwabo kwe-KM3244/2093000300 Carrier Roller Assembly kulandela inkqubo yobunjineli neyokuvelisa engqongqo:

1. Ukukhethwa kwezinto eziPhambili kunye nokuQiniswa:

• Iqokobhe langaphandle le-roller lenziwe ngentsimbi ye-alloy ye-carbon ephakathi (umz., 50Mn, 55Mn), ekhethwe ngenxa yokudibanisa kwayo okugqwesileyo amandla, ukuqina, kunye nokuqina.
• Ukufakelwa kuqinisekisa ukuhamba kweenkozo okuqhubekayo okulandela umda wenxalenye, kuphucula kakhulu ukumelana nokudinwa xa kuthelekiswa nezinye iindlela zokufakelwa, nto leyo ibalulekileyo ekumelaneni nemithwalo ephindaphindwayo enefuthe eliphezulu evela kwi-track chain.

2. Ukulungisa Umatshini Nokunyanga Ubushushu Ngokuchanekileyo:

• Umatshini we-CNC: I-blank eyenziweyo idlula ekujikeni nasekugayweni kwe-CNC ngokuchanekileyo ukuze kufezekiswe ububanzi obuchaziweyo bangaphandle, iiprofayili zeflange, kunye nobukhulu be-bore. Oku kuqinisekisa ukuqina okugqibeleleyo kunye nokunxibelelana okugudileyo okugudileyo kunye neekhonkco zethrekhi.
• Unyango lobushushu olunezigaba ezimbini:
  • Ukuqina Komzimba: Umzimba we-roller uqiniswa ukuya kubunzima obuphakathi obuqhele ukuba phakathi kwe-50-55 HRC. Oku kubonelela ngokuqina kolwakhiwo olufunekayo ukuze kuthintelwe ukuguquguquka phantsi kwemithwalo enzima.
  • Ukuqina kweFlange: Iindawo eziphambili zeflange, ezikhokela uthotho lwendlela kwaye zithintele ukuphuma kwereyile, zihlala zifumana ukuqina kwe-induction. Le nkqubo idala umaleko oqinileyo kakhulu, onganyangekiyo (58-62 HRC) kwimiphetho yeflange, nto leyo eyandisa ubomi benkonzo ngokuchasene nokuguga okurhabaxa.

3. Inkqubo yokuthwala etywiniweyo neyomileyo:

• Intliziyo ye-carrier roller ethembekileyo yinkqubo yayo yangaphakathi yokuthwala kunye nokuvala. I-HE LI assembly ibandakanya ulungiselelo lwe-multi-labyrinth seal oludityaniswe nezitywina ezidadayo ezikumgangatho ophezulu, ezingagugiyo (ezidla ngokubizwa ngokuba zi-Duo-Cone seals).
• Le nkqubo ilayishwe kwangaphambili ngegrisi enobushushu obuphezulu, enoxinzelelo oluphezulu, nto leyo eyenza umqobo oqinileyo ekungeneni kwezinto ezingcolisayo (uthuli, udaka, udaka) kunye nokuphuma kwegrisi, nangona zijongene neemeko ezinzima ezijongene nee-excavators ze-PC750/PC800.

4. Uyilo lweShaft eyomeleleyo kunye nePlastiki:

• Umngxuma wangaphakathi wenziwe ngentsimbi eqinileyo, eyilelwe ukuba ilingane kakuhle kwibracket yesakhelo somgubungeli. Le ndibano ibandakanya zonke izitywino ezifunekayo, ii-spacers, kunye nezibophelelo, ezithunyelwa njengeyunithi epheleleyo, elungele ukufakwa.

Izinto eziqwalaselwayo kwiNdlela yokusilela kunye neSindululo seXabiso

Iindlela eziqhelekileyo zokusilela kwee-carrier rollers ziquka ukuguguleka kwe-flange, ukungaphumeleli kwe-seal okukhokelela ekungcoleni kweebheringi, kunye nokubeka amanqaku emzimbeni we-roller. Inkqubo yokuvelisa i-HE LI (CQCTRACK) ijongana ngqo nale micimbi:

• Ubomi beFlange Eyandisiweyo: Iinkqubo zokuqinisa eziphuculweyo zilwa nokuguguleka kweflange ngaphambi kwexesha.
• Ukuvala Okugqwesileyo: Ubuchwepheshe bokuvala obuphambili buyanciphisa unobangela oyintloko wokusilela kokuthwala ngaphambi kwexesha.
• Ukulingana Okuchanekileyo: Umatshini wokulungisa ngokuchanekileyo uqinisekisa ukulungelelaniswa okufanelekileyo, kunciphisa ukuguguleka okungalinganiyo kunye noxinzelelo kwiindawo ezikufutshane zesithuthi esingaphantsi komhlaba.

Kutheni umthombo uvela kwi-HE LI (CQCTRACK)?

• Ukuhambelana kwe-OEM: Yenziwe ngokweenkcazo ze-KOMATSU zokuqala ukuze ilingane ngokuthe ngqo, ngaphandle kotshintsho.
• Ingqwalasela Yokuqina: Ugxininiso kumgangatho wezinto kunye neendlela zokuqinisa lujolise ekulinganiseni okanye ukudlula amaxesha eenkonzo ze-OEM.
• Ulondolozo Olusebenzisa Ixabiso Eliphantsi: Lubonelela ngenye indlela ethembekileyo nesemgangathweni kubaphathi bezithuthi abafuna ukuphucula uhlahlo-lwabiwo mali lolondolozo ngaphandle kokuphazamisa ukusebenza okanye ixesha lokusebenza kwezixhobo.
• Ubonelelo olupheleleyo lokuHlanganisa: Luhanjiswa njengeyunithi ehlanganiswe ngokupheleleyo, egcotshwe ngamafutha, netywiniweyo, okwenza kube lula ukufakela kwaye kunciphisa ixesha lokungasebenzi.

Isiphelo

I-KOMATSU KM3244 / 2093000300 Carrier Roller Assembly yinxalenye ebalulekileyo yokuguguleka ukuze kugcinwe ukusebenza kakuhle kunye nobude bexesha lee-PC750/PC800 excavator undercarriages. I-HE LI (CQCTRACK) isebenzisa ubuchule bayo obukhethekileyo kwi-metallurgy, i-precision machining, kunye ne-tribology ukuvelisa i-component enikezela ukusebenza okuthembekileyo phantsi kweemeko ezinzima zokusebenza. Kubanini bezixhobo kunye neengcali zokulungisa, ukukhetha lo mvelisi kuthetha isigqibo esicwangcisiweyo sokufumana iindawo eziqinileyo nezihambelanayo ze-undercarriage ezixhasa ukufumaneka koomatshini okuphezulu kunye neendleko zokusebenza eziphantsi.