Kayan aikin haƙa ramin ƙasa na KOBELCO SK330/SK350

Taro na Tayal na Gaba na Ingancin Waƙoƙi na OEM

Lambobin Sashe:SI1008, LC52D00032F1

Samfuran da suka dace: SK330, SK350 Series

Tushen Masana'anta & Mai Kera: CQC TRACK (HELI)

1. Bayani Kan Fasaha: Injiniyan Karkashin Jirgin Kasa Mai Daidaito Don Masu Hakowa Na KOBELCO

Jerin KOBELCO SK330 da SK350 suna wakiltar kololuwar injiniyan haƙa na hydraulic na Japan, wanda ke aiki a cikin ajin tan 30-35 na metric a kasuwannin duniya ciki har da Kudancin Amurka, Afirka, Rasha, Gabas ta Tsakiya, Turai, da Arewacin Amurka. Waɗannan injunan sun shahara saboda ingancin man fetur, daidaiton hydraulic, da dorewar tsarinsu - halaye waɗanda ke buƙatar daidai gwargwado na sassan ƙarƙashin abin hawa don kiyaye mafi girman aikin aiki.

Wannan takarda tana ba da cikakkun bayanai na fasaha don Track Front Idler Wheel Assembly, wani muhimmin ɓangaren chassis da aka gano ta lambobin sassan OEM SI1008 da LC52D00032F1, wanda ya dace da samfuran haƙa rami na KOBELCO SK330 da SK350. A matsayinta na mai ƙera kayayyaki mai takardar shaida, CQC TRACK (HELI) tana ba da kayan maye gurbin ingancin OEM waɗanda aka ƙera don cika ko wuce ƙayyadaddun kayan aiki na asali.

2. Haɗa Tayar Idler ta Gaba - Ma'anar Aiki

2.1 Gano Sassan

2.2 Babban Ayyuka

Tsarin Tayar Wutar Lantarki na Gabar Hanya (Track Front Idler Wheel Assembly) yana aiki a matsayin jagora da tsarin kula da tashin hankali na tsarin haƙa ramin mai haƙa ramin. Ayyukansa na aiki sun haɗa da:

• Jagorar Sarkar Layi: Yana samar da saman da ya taurare, mai juyawa wanda ke kula da daidaiton hanyoyin haɗin sarkar layi, yana hana motsi a gefe da kuma tabbatar da bin diddigin layi madaidaiciya
• Gudanar da Tashin Hankali a Layin Hanya: An ɗora shi a kan maƙallin zamiya da aka haɗa da mai daidaita layin hydraulic (LC54D00009F1), mai aiki yana ba da damar daidaita tashin hankali don dacewa da lalacewar layin, canjin yanayin zafi, da yanayin aiki
• Shakar Tasirin Load: An sanya shi a gaban firam ɗin hanya, mai aiki a wurin yana shan ƙarfin tasirin farko yayin da sarkar hanya ke fuskantar cikas, yana kare tuƙi na ƙarshe da tsarin ƙarƙashin abin hawa daga lalacewar girgiza.
• Rarraba Nauyi: Yana aiki a matsayin wurin hawa gaba wanda ke kiyaye tazara mai kyau tsakanin sarƙoƙin layi ɗaya, yana tabbatar da daidaiton rarraba nauyi a tsakanin abin hawa na ƙarƙashin abin hawa

3. Cikakkun Bayanan Fasaha

3.1 Injiniyan Tayar Idler

3.2 Tsarin Shaft & Bearing na Idler

3.3 Haɗin Mai Daidaita Waƙoƙi

Haɗawar idler tana haɗuwa kai tsaye tare da Track Adjuster and Recoil Assembly (LC54D00009F1), wanda ke ba da damar yin amfani da hydraulic tension:

4. Mafaka da Masana'anta: CQC TRACK (HELI)

4.1 Bayanin Masana'anta

HELI (CQC TRACK) kamfani ne da aka san shi a duniya kuma yana samar da kayan aiki masu nauyi a ƙarƙashin motar, yana aiki tare da cikakken haɗin kai tsaye. Kamfanin ya ƙware a cikin cikakken tsarin abubuwan da ke cikin chassis, ciki har da masu aiki, masu juyawa, masu juyawa, hanyoyin haɗin hanya, da kuma haɗa kayan daidaitawa.

Ƙarfin Masana'antu na Musamman:

• Ƙirƙirar Rufe-Die: Manyan injinan ƙera ƙarfe don ingantaccen kwararar hatsi da yawan kayan aiki a cikin mahimman sassan
• Maganin Zafi: Tanderun da ke sarrafa kwamfuta da kuma murhun carburetion suna tabbatar da daidaiton zurfin akwati da taurin saman
• Injin Daidaito: Cibiyoyin juyawa na CNC, cibiyoyin injina na tsaye, da tsarin walda na robot don daidaiton girma
• Haɗa Hatimi: Yanayin haɗa hatimi mai tsafta don hatimin fuska mai iyo da tsarin ɗaukar kaya

4.2 Kayayyakin Tabbatar da Inganci

4.3 Matsayin Sarkar Samarwa

CQC TRACK tana hidimar kasuwar bayan fage ta duniya kamar haka:

• Mai ƙera Ingancin OEM: Yana samar da kayan da suka dace ko suka wuce ƙa'idodin kayan aiki na asali
• Tushen Masana'antar Kai Tsaye: Cire alamun tsaka-tsaki ga masu siyan girma
• Mai Haɗa Kai Tsaye: Kula da cikakken iko a cikin gida daga zaɓin kayan aiki har zuwa haɗuwa ta ƙarshe

5. Abubuwan da ke ƙarƙashin motar KOBELCO SK330/SK350

Domin cikakken gyaran ƙarƙashin motar, ya kamata a kimanta haɗar gaban motar tare da kayan haɗin gwiwa. CQC TRACK tana ƙera cikakken fayil ɗin sassan chassis don injin haƙa jeri na KOBELCO SK.

6. Aikace-aikacen Kasuwa na Duniya & Daidaita Yankuna

An ƙera sassan CQC TRACK don yanayi daban-daban na aiki a manyan kasuwannin duniya:

7. Siffofin Fasaha & Ingantaccen Injiniya

7.1 Fasahar Hatimin Fuska Mai Shawagi

Haɗin idler ya haɗa da hatimin fuska mai iyo na Duo-Cone, waɗanda ke ba da:

• Warewar Gurɓata: Yana hana shigar yashi, laka, da ƙwayoyin da ke lalata iska
• Riƙe Man Shafawa: Yana kula da man shafawa mai ɗauke da sinadarai a tsawon lokacin aiki
• Juriyar Rage Shaft: Yana ɗaukar daidaiton aiki na yau da kullun ba tare da gazawar hatimi ba

7.2 Wurin Gudu Mai Tauri Mai Induction

Ana yin taurin induction don cimma:

• Taurin Sama: 55-62 HRC don juriyar lalacewa ta musamman
• Zurfin Lamarin: Zurfin da aka sarrafa na mm 6–10 don hana karyewar karyewa
• Taurin Zuciya: An kiyaye danshi a cikin zuciyar tayoyin don juriya ga tasiri

7.3 Haɗin Mai Daidaita Na'ura

Ladler ɗin yana hawa kan silinda mai daidaita hydraulic (LC54D00009F1) wanda ke da fasali:

• Ɗakin Hydraulic mai man shafawa: Daidaita filin mai sauƙi ta amfani da bindigar mai mai daidaitacce
• Spring Recoil: Spring mai ƙarfi mai matsi yana ɗaukar girgizar tasirin hanya
• Kunshin Hatimi: Jerin hatimin SI1008 yana hana wucewar ruwa da gurɓatawa

8. Tabbatar da Sayayya da Daidaituwa

8.1 Matakan Tabbatarwa Kafin Siyayya

1. Tabbatar da Samfurin Inji: Tabbatar da ainihin ƙirar samfurin (SK330LC-6E, SK350-8, SK330-10, da sauransu)
2. Tabbatar da Lambar Sashi na OEM: Tabbatar da lambar sashin idler (SI1008 ko LC52D00032F1) akan takaddun injin
3. Duba Haɗaɗɗen Mai Daidaitawa: Idan an maye gurbin gaba ɗaya, tabbatar da dacewa da lambar haɗaɗɗen mai daidaitawa LC54D00009F1
4. Tabbatar da Bibiyar Fitilar: Tabbatar da cewa bayanin martabar da ke gudana a saman idler ya dace da tsarin fitilar da ke akwai ko sabon tsarin fitilar waƙa

8.2 Tashoshin Samun Bayanai

9. Shawarwari kan Kulawa & Rigakafin Kasawa

9.1 Yarjejeniyar Dubawa ta Kullum

9.2 Yanayin Rashin Nasara Na Kullum

10. Kammalawa

Injinan haƙa rami na KOBELCO SK330 da SK350 suna wakiltar manyan jarin da ke buƙatar kayan aikin ƙarƙashin abin hawa da aka ƙera daidai gwargwado don kiyaye yawan aiki da rage lokacin aiki. Tsarin Haɗa Wheel na Gaban Mota na Track Front (SI1008 / LC52D00032F1) wani muhimmin sashi ne wanda ke aiki tare da Tsarin Haɗa Wuta da Mayar da Wuta (LC54D00009F1) don tabbatar da daidaiton tashin hankali, daidaitawa, da kuma shan girgiza.

CQC TRACK (HELI) tana tsaye a matsayin masana'anta mai takardar shaida wacce ke da cikakken haɗin kai a tsaye, ƙwarewar sarrafa zafi mai zurfi, ƙa'idodin tabbatar da inganci masu tsauri, da kuma cikakkun kayan aikin samar da kayayyaki na duniya. An ƙera kayan aikinmu don cika ko wuce ƙayyadaddun ƙayyadaddun OEM, yana tabbatar da ingantaccen aiki a duk faɗin yanayin aiki mafi buƙata a duniya - daga ma'adanai na Kudancin Amurka zuwa wuraren gini na Gabas ta Tsakiya, da kuma daga yankunan permafrost na Rasha zuwa ayyukan ababen more rayuwa na Arewacin Amurka da Turai.

Don takamaiman bayanai na fasaha, tambayoyin farashi, ko don yin oda ga kayan aikin KOBELCO SK330/SK350 na ƙarƙashin motar, tuntuɓi sashen tallace-tallace na ƙasashen waje na CQC TRACK tare da lambar serial na injin ku da takamaiman buƙatu.

Marubuci:
Sashen Tallace-tallace na Ƙasa da Ƙasa na CQC – Jack
Kwarewa a fannin Maganin Hako Mai Nauyi
Mai ƙera Takardar Shaida: HELI (CQC TRACK)

Bayanin Hana Amfani: Duk lambobin sassa da samfuran injin da aka ambata don ganowa da dacewa ne kawai. CQC TRACK kamfani ne mai zaman kansa wanda ke kera kayan haɗin bayan kasuwa da ingancin OEM. Duk alamun kasuwanci (gami da KOBELCO) sun kasance mallakar masu su.